Trumpet Warmup

Trumpet Warmup is a great new online portal for trumpet players, allowing you to customise your routine with the aid of resources from top artists and educators. Sam Neufeld, the website’s founder, speaks to me here about his exciting new venture.

Can you give a little background to your relationship with the trumpet?

At six years old, I heard my dad playing Clifford Brown, Miles Davis, and Lee Morgan frequently on his stereo. There was something about the trumpet that enthralled me at a young age. I wanted to do what they were doing.

Throughout middle school and high school, I took quickly to improvisation and jazz. My trumpet technique, however, held me back. Endurance and range were my biggest issues and at 16 years old my new teacher persuaded me to change my embouchure.

The whole process left me with a bad case of “paralysis through analysis” for years to follow.

Not until recently did I realize how consistent I need to be with my warmup and daily routine.

In my mind, trumpet technique is analogous to strength training. One month of deadlifting and squats everyday will set you on the right track, but you have to keep it up consistently for months and years to see noticeable results. Similarly, the trumpet takes lots of focus and deliberate practice over many years to develop proper technique and strength. That’s what I’m focusing on now. I’m excited for the day I am able to play a 3 hour gig and feel strong or stronger at the end of the night.

What prompted you to setup Trumpet Warmup?

To put it simply I wanted it for my own practising. I was unable to find something that would suit my needs. I wanted a video play-along routine that would allow me to practice back and forth a pro. I also wanted to have the ability to switch between different artists’ routines.

Over the past 5 years, I’ve worked freelance in videography, photography, and website design. I knew that I had the skills to make it happen with little up-front cost – so why not give it a shot and scratch my own itch?

Who is it aimed at?

Trumpet Warmup is aimed at the intermediate trumpet player. A high school student or an amateur will benefit most from Trumpet Warmup.

There will be some value for the pro or the beginner, but it’s aimed at the intermediate player for now.

What are the key elements that set it apart from other platforms?

The video (quality and presentation) sets it apart. I’ve spent a lot of time crafting a look that will engage the user and allow them to see the artist’s embouchure and posture. It’s meant to feel like you are practicing with the pro.

What new developments are you currently working on?

Content, content, content. I started Trumpet Warmup a few weeks before COVID-19 lockdowns began, which threw things off track. I’m back on track now and working hard to crank out the content so there is something for every user.

How can readers find out more?

If you’ve made it this far, I just have one ask. Please sign up for the newsletter by visiting www.trumpetwarmup.com. It’ll take a few seconds and would mean a lot to me. If you have any comments, questions, or feedback – please send me an email to sam@trumpetwarmup.com


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]

Trumpet Artist Profile : John Eth

John Eth is a well-respected trumpet player originally from Phoenix, Arizona. His decades of performing on stage and in the studio have given him a rich understanding of just what is, and is not, important in a trumpet career.

John Eth, Trumpet Artist

Tell us a little about what got you started on the trumpet.

I remember every weekend my father playing Harry James records all day Saturdays and Sundays. Even though my father was not a musician he loved the Harry James big band. So when in 4th grade  the band director came around to classes asking if anyone wanted to be in the band I immediately raised my hand. When asked what instrument I wanted to play I volunteered for the trumpet. My parents rented me a trumpet before the band would start so I was very excited to try and play it.

I would put Harry James records on the player and listen a little then try to play what I was hearing. I had no idea of what notes were or what valves to push down but I kept trying to play what I heard and eventually played what sounded to me like the same note. I practiced this way until band started at school. Unfortunately this led to me hearing in the key of B Flat. Even today I hear notes that are relative to my trumpet.

My music teacher was a french horn player and also in the Phoenix Symphony. I studied with him through sixth grade. At that time he suggested that I should take lessons from Hershel Kreloff the principal trumpeter in the Phoenix Symphony. I studied with Mr. Kreloff until the summer after 8th grade. I had split my lip very badly in a summer community band and Mr. Kreloff said that he could not help me and that I would probably not be able to play trumpet again. I was devastated. After calling every trumpet teacher in Arizona I came across Tony Picciotto. Tony was a trumpet player who had played with the Tommy Dorsey Orchestra. Tony recently had moved to Scottsdale Arizona and was teaching at Otto Steins music in Phoenix. Tony took me under his wings and was the only one that said he could help me. With Tony Picciotto’s help I was soon back to practicing the trumpet.

When did you decide that you wanted a career in music?

I never really thought that music or playing the trumpet would lead to a career. The first time that I realized that you could make money playing music was in High School. A few of us had gotten together and formed a Tijuana Brass type band and was offered a gig at a Frat party at Arizona State University. Non of us were old enough to even drive a car so our parents had to drive us to the job. We each were paid $50 dollars. That was a lot of money for High School kids. That one job changed my thoughts and was the start to my career in music.

What styles of music have you listened to most over the years?

Music styles that have influenced me the most are Big Bands including the Harry James Big Band, all of the Maynard Ferguson Bands and the Stan Kenton Orchestra. Rock and Roll Bands, Blood Sweat & Tears, Chicago and Tower of Power.

How about career highlights?

As I look back to my career some of the highlights would include, in high school through auditions being selected to 1st chair trumpet in the All State Orchestra and in my senior year of high school being granted a scholarship in music to Arizona State University.

My freshman year at Arizona State University I was selected to first chair trumpet in Orchestra, Concert band and Brass Choir. Another memorial moment was being featured at a football halftime performance playing Doc Severinsen’s ‘Monday Monday’.

After Collage I have was blessed with being able to perform with over 30 major entertainers including Elvis Presley, Tom Jones,Buddy Rich, Aretha Franklin, The Four Tops, The Temptations, Sammy Davis Jr., Liberace, and to many more to name.

I have been a guest artist on the TBN network, Featured on World Wide TV as a Christian artist and performed on stage with Phil Driscoll. I have also recorded my own Christian album Titled “God and God Alone”. Another highlight was being selected to be in “The Upper Register” a publication listing over 200 Lead and High Note Players.

CD: God and God Alone, by John Eth

My trumpet skills have allowed me to have recorded a number of studio projects including the following, Buck Rogers and The 21st Century television movie , the theme songs for the television series Harper Valley PTA and Sheriff Lobo. More of my studio work has included two Super Bowl half time shows and over 20 CD’s for various artist.

Throughout my musical career I have had the opportunity of meeting three famous trumpet players that I have had a personnel relationships with that have been a blessing and inspiration to me. 

I had the pleasure of having lunch with Mr. Clark Terry where we discussed his musical career, the people who influenced him as a player and how he has influenced many young players. Truly an inspirational man.

Bobby Shew and I met at a college performance where I had the pleasure of taking the place of Lou Soloff in the trumpet section. Afterwords Mr. Shew and I have kept in touch for many years as friends. He has been a true inspiration to me and has blessed me by endorsing my trumpet skills.

Bud Brisbois and I became very close friends after meeting each other at a rehearsal band in Scottsdale Arizona. We would meet for lunch at least 2 to 3 times a week discussing everything from trumpet to life. Many of the things that I learned from him I still apply to my playing today. Bud was my friend, an inspiration, and is truly missed.

Of all the accomplishments, playing, recording and being featured that I have had throughout my life I have to say that the most important things to me are meeting and becoming friends with Clark Terry, Bobby Shew and Bud Brisbois. The time spent with these great musicians can never be replaced.

What does your practice routine look like?

My practice is very basic. I constantly work on corner and support strength. Lip trills slow and fast everyday. An example would be trilling from second line “G” in the staff to 3rd space “C” in the staff. I then go down chromatically, next would be “F# to B natural” and so on. I do these lip trills until I feel a lactic acid build up then stop and rest. It’s the same idea as lifting weights. You have to build up the muscles that are used to play in all registers of the instrument.

I also never practice anything louder than Mezzo forte. By practicing at a softer level it keeps the aperture tighter and more closed. This is very important for playing in the upper register. All my life the routine I have used to build more breath support consists of Long Tones. I practice Long Tones by starting on 3rd space “C” in the staff and going down chromatically the entire range of the instrument. I hold each note out as long as I possibly can, not breathing until all I can muster is a very small buzz. Make sure that you are sitting down if you do this! You can possibly black out from lack of oxygen.

How about your horns and mouthpieces?

At this time I play Carol Brass instruments. My trumpet is a Carol Brass model CTR-5060H-GSS. It is silver plated with a sterling silver lead pipe. I find that this instruments sound is versatile enough to play all the different styles of music without being to bright or to dark.

A number of years ago my business partner and I started Xstream Mouthpieces. Being a machinist I designed my own mouthpiece with a different style of cup. I call this design a “Compression Cup”. I have played this design cup for over 10 years. 5 years ago we closed our business and sold all of our machines used to make mouthpieces.

I now play a Legends Brass custom designed mouthpiece, “Legends Eth”. Over time, I was no longer getting the results that I wanted with my Xstream mouthpiece. I decided to reach out to Derek Saidak to see if he could help. I asked Derek if he could scan the rim and cup of the mouthpiece that I designed and put it on his backbores. He said “no problem” , so I sent my mouthpiece off to Mr. Saidak. Within a few weeks I received 3 mouthpieces with an exact rim and cup match on the Legends Brass mouthpiece design. All three had a different backbore designed by Legends Brass. This gave me exactly what I needed. I am now a fan of Legends Brass and highly endorse their products. I encourage all trumpet players to give them a chance. Legends Brass has more mouthpiece options than any other mouthpiece manufacture I have come across and can make you a custom mouthpiece as well.

My custom Legends design mouthpiece should be available soon if anyone would like to try it. Many Thanks to Derek Saidak for helping me achieve my goals.

How having you been managing during this global Covid lockdown?

The global lockdown has been stressful at best. I found that keeping focus on my music has been very helpful. I recently set up a small recording studio in my office that lets me play along and record using music tracks. This at least gives me a feeling of playing with a musical group. If this is not possible for players to do I would encourage everyone to put on a CD or an MP3 and play along with it. I feel that it is very important to be playing music not just practicing exercises.  

Only one can guess what the future holds. I believe that after a vaccine is approved things will get back to normal. Music is so much a part of every day life through radio, live concerts, television, movies and so much more that the public will be the driving force behind bringing live performances back.

What piece of advice can you offer young and aspiring players?

Don’t be afraid to invest in yourself and in try new ideas. It used to be a given to start out using a bach 3C mouthpiece or something similar in size. Don’t be afraid to try a smaller mouthpiece! The upper register will be easier to play. Buy a quality instrument. If you cannot afford a new instrument buy a good used major brand instrument. Take lessons from someone that you admire for their abilities. If you would like to be a symphonic player take lessons from someone that has experience in that field of music. Likewise if you aspire to be a Maynard Ferguson style of player take lessons from someone that can help you with the extreme upper register of the instrument. Don’t be afraid of changing instructors if you are not getting the results that you want.

What are you working on at the moment?

Today I am working on a new website, johneth.com that will have everything from tips on practice, how to overcome injuries, video instructions, performance updates and much more. The website should be up and running in early November 2020. I have also started writing a new book “Surviving The Trumpet” which will soon be available. Starting a new recording project is also one of my pet projects. Even though the future is a little rocky right now I encourage everyone not to get depressed. Keep working on your God given talents and everything will be alright.  

You can find out more about the Legends Brass mouthpieces at https://legendsbrass.com

Legends Brass

Trumpet Artist Profile : Charles Lazarus

Trumpeter Charles Lazarus is a multi-faceted performer, composer, producer and band leader whose career has included tenures in Dallas Brass, Meridian Arts Ensemble, Canadian Brass, and the Minnesota Orchestra. He has appeared as a soloist with numerous orchestras around the US and Canada, performed with the Empire Brass, New York Philharmonic Principal Brass, London Brass, Barry White, and opened for Tony Bennett.

Charles has performed and taught master classes in every US state, Canada, throughout Asia and Europe, and currently serves as adjunct faculty at the University of Minnesota. He has created and produced several crossover orchestral shows featuring his various ensembles with which he has released four CDs and a children’s animated short film.

Hi Chuck, can you please give a little background to your relationship with the trumpet?

When I was 9, my Dad took me to a Dizzy Gillespie concert and I got to meet Dizzy backstage.  He actually let me try to play a note on his trumpet which was pretty exciting! I didn’t start playing in band until I was 12, but I picked trumpet and fell in love with the sound and versatility of the instrument right away. Trumpet was just the right amount of frustrating to keep me chasing the dangling carrot of success!

When did you decide that you wanted a career in music?

I knew this would be my career path within the first few week of playing the instrument. It was the first way I had ever seen my own self improvement and I was hooked!

What styles of music have you listened to most over the years?

All styles. I tend to listen more to styles of music I’m not playing at the time.

You have worked across many, many genres and styles over the years. What are the challenges both musically and technically, adjusting to these changes?

Advancing harmonically in jazz is challenging when playing classical music full time, so I try to make sure my daily routine covers a lot of ground harmonically. The biggest difference between my approach as I change styles is articualtion. I pay a lot of attention to that.

How do your practice routines need to change to reflect this?

I pick days where I focus on certain modes or patterns in my playing and incorporate that in my flow studies and arpeggio workouts. Monday= diminished day Tuesday= lydian dominant etc. That kind of thing. Sometimes I substitute my usual Clarke or Vizzutti studies with the John McNeil Art of Jazz Trumpet studies. I can work on my fundamentals of airflow and articulation while exploring harmonic ground. It’s way too easy to get stuck in open harmonics. I try to branch out. I consider it cross training. It’s more efficient and way more fun. I also practice the opposite of what I am performing on any given week. If I’m playing 2nd trumpet in Beethoven one week, I do a lot of high note practice. If I’m playing lead on a pops show, I practice a lot of soft low notes.

Career highlights?

Oh man. So many to be grateful for!
Playing the Britten St Edmunsbury Fanfare with Doc Severinsen and Bud Herseth.
Playing the Haydn Trumpet  Concerto in Carnegie Hall with the NY String Orchestra.
My first concert with Canadian Brass.
Playing My Spirit Be Joyful next to Rolf Smedvig in Empire Brass.
Playing my own jazz compositions with the Minnesota Orchestra for the first time with Osmo Vänskä conducting.
The privilege to play in the Minnesota Orchestra brass section with friends that inspire me.

Can you talk a little about the horns and mouthpieces that you play, and the process of working with Pickett Brass to find the right setup?

Well, I’ve known Peter for many years when he was just getting started in his garage! He is a great guy and a total pro. I was already playing Yamaha trumpets when I met him and I’ve been playing them since I was 19. I’ve also owned a number of Blackburns over the years and they are fantastic as well!  For mouthpieces, Peter has always been willing to work with players to find a great fit for their style and technical needs. Finding the size and contour of his rims and cups was kind of like finding a pair of shoes that fits perfectly. He’s great at that and because I have so many varied demands on my playing, my line of mouthpieces tends to have something for everyone. It’s all on the Pickett Blackburn site.

I should say though, that for me, the thing that really makes his mouthpieces work so well is the evenness and quality of his backbores. They really even everything out allowing me to relax and blow smoothly, giving me more control over my sound than I’ve ever had. He has a lot of little tweaks in his designs that can accomplish pretty much anything you need. Plus the staff there are all great trumpet players that are a blast to hang out with. In addition to my work with Peter, I’ve also worked a lot with Eric Murine (killer player) and the rest of the staff there on mouthpieces as well as eating BBQ and perfecting the “Whiskey Chew”-  An important art in Lexington!

How have you managed during this global lockdown? How do you think that musicians are going to need to adapt in the future to deal with may be a very different musical world?

I’m just trying to practice, plan recordings, and double down on learning technology. I’ve been setting up my home studio for recording and I’ve been getting into some video projects for fun. There are so many new and increasingly  efficient ways to reach people online. it’s a perfect and necessary time for all of us to learn more about how to pilot our own ships.  I really think when this mess is all over, people will be so starved for live music that it will be a roaring 2020s age of music. I am trying my best to make sure I’m ready for that.

What advice would you give to young and aspiring trumpet players?

View every mistake and failure as an opportunity to learn. Be willing to fail.  Every little success is built on a multitude of failures. Most importantly though, enjoy making music. Then, all the work is just an enjoyable part of the process. The smarter you practice, the better you get. The better you get, the easier it is. The easier it is, the more fun you have!

What are you working on at the moment or in the future?

I’m recording some brass quintet and solo trumpet music by Jack Stamp and learning Logic Pro Audio.

You can visit the Charles Lazarus website here.

The range of Lazarus Signature mouthpieces can be viewed here.

You may also be interested to read this interview with master craftsman, Peter Pickett.


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]

Trumpet Artist Profile : Christopher Still

Chris Still is a renowned musician and educator, and I was delighted that he was able to find time to do this interview. He is currently a member of the Los Angeles Philharmonic and the founder of ‘Honesty Pill’.

Regular readers will have read Chris’ feature a couple of weeks ago – If you haven’t already, please do follow this link to find out more about his incredible project.

In THIS feature, Chris talks about all things trumpet! …

Please can you give a bit of background to what got you started playing the trumpet and who your early musical influences were?

My father was a really big early influence for me. He was an amateur trumpet player in the local fire Department band and would often take me along with him for rehearsals. Actually, one of my earliest musical memories was of him playing an old Shelton Brooks Dixie land tune, “The Darktown Strutters’ Ball”. I’m sure I still have that sheet music lying around in a box somewhere.

He also had a pretty extensive record collection including the Phillip Jones Brass Ensemble, and too many Herb Albert and the Tijuana Brass records to count.

Like every other teenager growing up in the 80s, I also thought I was going to become the next Maynard Ferguson, but luckily, I realized at an early age that probably wasn’t a really good career path for me.

At what point in your early trumpeting did you realize that an orchestral job would be your aim?

I actually did not set out to become an orchestral trumpet player, but initially thought I would become a band teacher. In fact, I did my undergraduate double major in music education and performance at the Crane School of Music SUNY Potsdam in NY. And I think that undergraduate degree in education was one of the best things that ever happened to me. It made me a better performer, clearly a better teacher, and has helped me become a better coach as well.

I think that every performer should do some teaching, and every teacher should still get up and perform regularly. That is one of the strongest takeaways from my early career.

It wasn’t until a performance of Stravinsky’s “The Soldiers Tale”, that I realized I wanted to switch my focus to orchestral performance. I ended up going to do a Master’s degree at the New England Conservatory in Boston and that sort of set my trajectory towards orchestral performance.

How do you manage to juggle all of your other projects alongside keeping your trumpet playing at the highest level?

Other projects aside, I think the best way to answer this question is to first address how to just keep your playing at a high level in any case. And that comes from being efficient and effective in the practice room. I think this is an area most people could improve a lot. I mean, think about it. One of the biggest questions i get is how long should I practice something? This would dictate how much time you have leftover afterwards right? And there are several ways to answer this. Number one, when your mental focus begins to fade and it becomes diminishing returns, it’s time to move on. Or, if you have become physically exhausted to the point of diminishing returns that’s another good indication it’s time to move on to something else.

But the number one way to be efficient in the practice room and know when to stop, is when you have achieved your goal for that session. The problem is most people don’t actually set goals or have any metric to know if they’ve improved or achieved anything. Most musicians just spend their wheels in the practice room. So how would you ever know it’s time to move on? And that’s the problem with efficiency right there.

So to get back to your original question, I have found I have time for other projects in my life by becoming efficient with the work that I have to do for the Los Angeles Philharmonic. Of course sometimes I realized that I’ve taken on too much and I have to put a project on the backburner for a while. Developing some skills to balance work life as another area I think most musicians could improve a lot.

I guess the last point to make answering this question is that the trumpet section of my orchestra is a pretty efficient machine. Everyone pulls their weight and everyone has the skills and mindset control to be effective and efficient and get the job done. When you are surrounded by people with that type of work ethic, it makes it really easy to stay in stride.

Have your practice routines and practice sessions changed much over the years?

Oh completely. My practice routines change regularly depending on what type of challenge I need to face. A great tip here is to try and practice the opposite types of challenges at home then you have to do at work. For example, if we are playing a lot of Beethoven on Rotary trumpets for a week or two, I will be sure to practice some high horn work like piccolo. Or, if we are playing some world premiere with a ton of really loud playing, my practice sessions at home look a lot more soft, low and relaxing.

But to answer the question in more of a big picture, I think it’s important to know why you are practicing a certain thing or using a certain tool in the practice room. If you understand the “why”, then you can switch up what you do whenever you want and still accomplish the goals. I think when people don’t know the purpose of a particular approach or exercise, their practice becomes a little mindless, and certainly can become boring or routine.

Another thing i should mention here is, as the years go by my level of awareness continues to rise. Every five years or so I realize that I could probably be doing something even more efficiently than I have been doing it. So I make adjustments. This is good news though because this means I am on an upward trajectory with my playing. And the only other option is to be on a downward trajectory, and I’m really not interested in that.

What are the key things that young aspiring players should concentrate on?

This is a big question. And it depends on the context. However if I were to answer generally, if I were to give you the number one thing that would fast track your improvement, is to record yourself. And I don’t mean once in a while. I mean record yourself every day, for a very short period of time, and then listen back right away while you still remember what it felt like. That is how you improve quickly. That is how you raise your levels of awareness. That is how you swallow the honesty pill and deal with the things in your playing that need to be dealt with for you to improve.

Also, take your work seriously, but don’t take yourself seriously. Musicians are really good at forgetting why they started playing an instrument in the first place…because it brought us joy. That is something that we all need to remember to connect to as we strive to become better musicians. And that is something you can do when you’re first starting out or if you’re a seasoned pro. Find the joy.

Would you say that your approach to trumpet teaching has changed much over the years, and if so, how?

One of the things I’ve noticed having been a coach and teacher for so long, is that everyone tends to make the same exact types of mistakes. In fact, in the study of excerpts, many people make the exact same mistakes over and over. So when someone comes in to study with me, my default is that i already know most of what they’re probably going to do wrong. This has saved me a lot of time and made me become a much more effective teacher.

However, one of the things that has evolved and my teaching over the past 10 years or so, is I try to create more of a thinking space for my students. I am letting them find these solutions themselves with my guidance, instead of just telling them what they’re doing wrong. I think I have realized that my number one job as a teacher is to help my students do their own best independent thinking. That is what will give them the tools to solve problems when I am not around. And that’s sort of the point of teaching isn’t it?

Trust me, I still call my students out when they make mistakes, but I have been making an effort to lead them more than just tell them what’s wrong. Funny thing is, when they record themselves, they hear their mistakes right away anyway, so I normally don’t have to say anything.

You have worked closely with a number of makers and manufacturers in making sure that you are playing gear that is best suited to you. Please can you talk a little about your relationships with any of these?

I have been a Yamaha performing artist since I was the principal trumpet of the Colorado Symphony, and can’t say enough great things about the support I have gotten from Bob Malone and my colleagues at Yamaha. The equipment is unparalleled in my opinion, and the support network that comes with it is really aligned with my needs.

Joining the Yamaha family was a really easy decision for me because i already loved their equipment and it just keeps getting better.

What has been your most enjoyable project or concert to be a part of?

That’s a tough question to answer. I’m lucky to work in an orchestra that experiments with a wide variety of genres and types of projects, so it’s hard to pick just one. I’ll narrow it down to three.

• Mahler 9 with the Los Angeles Philharmonic and Gustavo Dudamel at the Musikverein in Vienna. It doesn’t get much better than that for me.
• Anytime John Williams conducts the LA Phil at the Hollywood Bowl for 18,000 screaming, light saber waving fans
• Playing with Herbie Hancock at Walt Disney Concert Hall and talking to him about his dogs after the concert.

What are your trumpeting ambitions for the future?

Happily, the trumpet section of the LA Phil is pretty ambitious and we are always pushing each other to improve and discover things about our playing. So I guess my ambition is to keep contributing and supporting that mission in every way I can.


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]

Meet the Maker : Peter Pickett | Progress brings change, but precision craftsmanship endures.

Originally posted June 23, 2020 by John Hutchinson; Updated July 29, 2026 by Leslie Saidak. In 2020, Mouthpiece Online interviewed Peter Pickett, founder of Pickett Brass and now also steward of Blackburn Trumpets. Six years after our original conversation, Peter Pickett reflects on what has changed—and what has not. (Jump to 2026 update.)

Pickett Brass and Blackburn Trumpets

At Pickett Brass and Blackburn Trumpets, every mouthpiece and instrument begins with a deep respect for the art of music and the craft of precision.

2020 INTERVIEW

Can you talk a little about the background to getting started on this trumpet craftsmanship journey with Pickett Brass and Blackburn Trumpets? 

This entire journey of Pickett Brass and Blackburn Trumpets, in hindsight, appears elegant and neat when laid out on paper, but it has actually been quite challenging. I’ll look back one day and say that all the pieces were laid out and it was such a natural progression, but the truth is that opportunities came and went. With some luck, I was able to latch onto key ones along the way. For example, when Cliff Blackburn approached me in 2009 about working with him to carry Blackburn Trumpets forward, I happened to be in the right place at the right time.

Most of the company’s significant steps forward have hinged on being in the right place at the right time, paying attention, and taking advantage of fortuitous timing. You must always be aware of what’s going on around you and have the imagination to envision the possibilities, even when they sound impossible in the moment.

My internal, irrational, and unconscious drive to bring this all to life came from combining the joy of playing trumpet with my background in engineering and manufacturing. What could be a better combination of those interests? So much of the company’s progress has been driven by brute force and pure work ethic: powering through inefficiencies and uncertainty, accelerating our learning, and not settling for what was easy or merely sufficient. Out of the gate, you simply have to execute and do the work required to get it done.

When Pickett Brass officially started in 2003, I did not have all the skills necessary to do what we do today. But that didn’t stop me from stepping forward to see if all of this could work. Stumbling through numerous issues that had nothing to do with the actual parts really woke me up to the sheer number of obstacles we would need to overcome.

Peter Pickett

Who or what were your inspirations?

Most of my inspiration comes from wanting to make something meaningful and bring something to life. Being able to create something from raw materials—from almost nothing—is what fuels me most. Coupling that with music, and creating something that contributes to the creation of music, only reinforces the inspiration.

The incredible variety of artists I get to meet and work with is humbling. Ultimately, it’s a privilege to be part of this music-making community, and that is not something to take lightly. When we are actively part of something larger than ourselves and can contribute to the greater good, it isn’t an opportunity to boast or brag, but rather to quietly contribute to the growth of the community and build strength together.

Peter Pickett with Allen Vizutti
Peter Pickett with long time customer and friend Allen Vizutti

Did you set out with ideas of how manufacturing could be improved?

Absolutely. When any process becomes elegant and efficient, it’s more fun and enjoyable. This applies to any endeavor. We don’t play trumpet because it’s hard, no fun, and produces unpleasant sounds. Instead, when we become adept and efficient at playing the instrument, it becomes more enjoyable—and the end product is that much better. Wanting the business, design, and production processes to be elegant and efficient has always been a significant driving force.

How and why did you branch out from valve trim-sets to the excellent custom mouthpieces that you now produce?

When all of this started in 2001, I was aiming to make only one set of trumpet buttons for myself. They were made by hand—nothing special, but made by me, for me. Stems, top caps, and bottom caps followed, and as far as I could tell at the time, that was all it was going to be.

Mouthpieces followed as a natural progression around 2007. I had the machines to make them and, as every trumpet player knows, no single mouthpiece is going to be “it” for every player. The unlimited possible variations in brass-instrument mouthpieces allow many designers and manufacturers around the world to participate in this industry. That was exciting. Despite the idea that “everything has been invented already,” I could still produce unique mouthpieces that worked differently for players and had never been made before.

Are there any unexpected challenges that you have met along the way?

Absolutely – seemingly endless and absolutely overwhelming at times.  Most people don’t realize what goes into creating and running a complete business. Making actual mouthpieces is only one small aspect and can be challenging in itself, but ultimately it takes so many other steps to get that freshly made mouthpiece out the door to a player.  So overcoming the challenges of running a business from the financial processes, to ecommerce development and management, taxes, payment processing, facilities, and numerous others, have all been challenges.

Running a successful manufacturing business takes a lot of time and commitment. How do you balance this with having a life outside of the workshop?!

Running a small business is all-encompassing and a lifestyle choice. Some call it a curse and others a privilege, but there is almost no time in any day when the business isn’t being worked on or thought about. So balance in the traditional sense is fleeting and fairly nonexistent.

The variety of activities the business offers is one outlet. From manufacturing to meeting with customers, there is a wide range of involvement and autonomy. Trade shows, for example, give me a fantastic opportunity to meet new people, hear new music, and see new places outside the shop.

Can you talk a little about your work with Cliff and taking on the Blackburn Trumpets brand?

Cliff and I have been friends for a long time, beginning when I met him at the 2004 International Trumpet Guild conference in Denver. He probably doesn’t remember that initial introduction, but it was my first opportunity to talk briefly with him and his wife.

Over the years we saw each other often and talked at conferences, eventually working together on manufacturing Blackburn trumpet mouthpieces and other components. At the 2009 ITG Conference in Harrisburg, Pennsylvania, Cliff asked if I would be interested in helping carry Blackburn Trumpets forward after his retirement. Of course the answer was yes, but little did I know it would take another seven years to work through the details.

During that period we trained, learned, and explored what made Blackburn Trumpets so well known. Even after we acquired the company in 2016, an incredible amount of learning and work remained. It has been an overwhelming exercise, but it has ultimately proved worth the work and challenges.    

What were your plans and ambitions for the future?

As it turns out, making trumpets from scratch is hard. The process is mind-boggling when you consider all the details along the way—and details matter. We were working toward complete documentation and process improvements so the Blackburn brand could continue well into the future, with strength and a solid succession plan.

I wanted the Blackburn team to expand as our space expanded. With a solid group of craftspeople who understood the quality and technical expectations, we could produce like no other. On the mouthpiece side, we continued to expand capabilities and improve processes. It may not sound significant, but reducing the number of steps needed to produce a mouthpiece—or any product—makes the entire process better, easier, and more enjoyable. We strive to study how we work and try new approaches so we remain relevant and avoid destructive complacency.

At the moment, the world is in the midst of the Covid-19 pandemic. How has this affected you?

The Covid-19 pandemic and uncertainty has all but fully consumed everyone.  Our business, like many others, has been shut down for a while to stem the spread of the virus, bringing to a halt the production of mouthpieces and trumpets like never before.  In addition, the economic fallout from the significant job disruptions and losses worldwide is incredibly disheartening.  Despite the day to day challenges facing us, I am optimistic that we will get through this together.  This period of time offers an unprecedented opportunity for self reflection and a pause – a universal “time-out” per se. The challenge has been that this has all progressed so quickly and it’s hard to appreciate the sudden change in routines and ‘normal’ and do the self-reflection and evaluation.  Herein lies the present challenge – and the chance for the once in a lifetime opportunity.  

2026 UPDATE

What are the most significant changes at Pickett Brass and Blackburn Trumpets since the original interview in 2020?

The biggest change is that the plans we were discussing in 2020 have become a much broader, more mature operation. We have continued to document processes, strengthen the team, improve the way work moves through the shop, and expand both the Pickett mouthpiece side and the Blackburn instrument side of the business. Of course, we have Covid in there as well – a disruptive event that lasted years.  I think its effects are still being felt, both in how people interact and also in the economy. Covid has become part of how we relate and navigate.

What has not changed is the foundation: we are still in Lexington, still combining musicianship with engineering, and still making products with extraordinary attention to consistency and sound. The scale and range are larger, but the goal remains the same—to make tools that help musicians do their best work.

How has your product line expanded or changed?

The product line now reaches well beyond the trumpet trim sets and early mouthpieces that started the business. On the mouthpiece side, we offer one-piece and modular two-piece designs across trumpet, cornet, flugelhorn, trombone, and other brass applications, along with artist models, educator and young-artist options, multiple materials and finishes, scanning, replating, and related services.

Blackburn has also grown into a wide family of complete instruments and components: B-flat and C trumpets, cornets, piccolo and specialty instruments, bugles and herald trumpets, plus bells, leadpipes, and accessories. That breadth lets us serve a developing student, a teacher building a studio, and a professional looking for a very specific response or sound.

What was your very first shop like? What tools and equipment did you use, and how did that change along the way? When did you move into CNC technology?

The first “shop” was very modest – the 300 square foot garage behind my house. The original goal in 2001 was simply to make one set of trumpet buttons for myself, and those first pieces were made by hand. From there I added the tools and skills needed for stems, caps, and other small parts. By about 2007 I had the machining capability to begin making mouthpieces, and each new product exposed the next limitation in our tooling, measuring, documentation, or workflow.

The move toward CNC was not a single switch so much as an evolution. Manual work taught me how the material behaved and what the musical result needed to be; CNC machining, CAD/CAM, better inspection tools, and more disciplined process control then gave us repeatability and the ability to explore designs much more efficiently. Today our mouthpieces are designed and manufactured in-house using proprietary CAD/CAM software and precision machining, followed by careful measuring, hand finishing, plating, and individual inspection.

How has the Blackburn Trumpets part of the shop evolved? Are high-tech tools used there, or is it all done by hand?

Blackburn has become more deeply integrated into the Lexington shop, while preserving the instrument-making knowledge passed down from Cliff. It is not a choice between technology and handwork; the process depends on using each where it contributes most.

Precision equipment supports design, tooling, repeatable components, pistons and valve blocks, bells, tubing, and inspection. But a Blackburn instrument is still assembled, fitted, finished, tested, and adjusted by skilled craftsman. Bell making, soldering, alignment, final finishing, and play-testing all require judgment that cannot be reduced to pushing a button. Modern engineering helps us hold the details consistently; hand craftsmanship is what turns those details into an instrument.

What is the best way to get Pickett Brass mouthpieces and Blackburn Trumpets?

The easiest starting point is the Pickett Blackburn website, where players can see the broad product range and learn how the different options fit together. We ship worldwide and also work with a number of dealers.

For a specific mouthpiece or instrument, however, the best route is often a conversation. Players can schedule a phone consultation or a visit to our Lexington shop, and trade shows remain a great place to meet us and try equipment. A dealer can also be the right choice when a player wants local guidance. The important thing is not the channel—it is getting enough information about the player, instrument, and musical goal to make a useful recommendation.

You built the bugle used for the Kentucky Derby. How did you make that connection? What kind of instrument is it, and what mouthpiece is used?

That project grew out of a long relationship with Steve Buttleman, the official bugler at Churchill Downs. As the 150th Kentucky Derby approached in 2024, we reached out because it felt like the right moment to create a new instrument for him and bring the Blackburn name back to Churchill Downs.

Steve Buttleman
Steve Buttleman, official bugler at Churchill Downs

We built Steve a custom Blackburn bugle and a B-flat herald trumpet for the Derby and for performances at Churchill Downs and Keeneland. The herald trumpet is based on the Blackburn 313A20S bell and #52 leadpipe, a combination designed to project with power and clarity while remaining easy to play in the fanfare setting. The instrument was a gift from our team, and hearing it carry the “Call to the Post” was both a proud Kentucky moment and a meaningful example of what a close relationship between maker and musician can produce.

What other ways have you connected with and contributed to your local community?

Community has always been part of the reason for doing this work. We contribute first by keeping specialized design and manufacturing in Lexington, employing and training local craftspeople, and making instruments that carry Kentucky workmanship to musicians around the world. We also welcome players and educators into the shop, meet students and professionals at events, support music education through educator and young-artist offerings, and collaborate with local partners when a project needs expertise beyond our walls.

The Derby instruments made that connection visible on a very large stage, but the quieter work matters just as much: helping a student find equipment that makes playing more rewarding, sharing knowledge with an educator, supporting a local ensemble or organization, and creating skilled work here at home.


Pickett Blackburn

We hold an unwavering belief that our knowledge, passion and commitment to you, the musician, will increase confidence on your musical path. We are musicians helping musicians through precise machining, exceptional service, and integrity. We honor and protect the legacy and traditions by guaranteeing the highest product quality and consistency at all times.

-Pickett Brass and Blackburn Trumpets


Original post updated by Leslie Saidak July 29, 2026.

Check out the ultimate directory of trumpet mouthpiece and brass instrument makers

Honesty Pill : In conversation with Christopher Still

Educator, clinician and coach (and also a trumpet player with the Los Angeles Philharmonic!) Chris Still has a really fascinating project that can benefit ALL musicians. I am extremely grateful for his time to chat about “Honesty Pill”.

Can you give a brief rundown of what Honesty Pill is all about?

Sure. Honesty Pill is an online resource that helps people teach themselves to be better musicians. I like to talk about auditions a lot because they require such complicated and focused effort, and because those same techniques apply to all areas of musical performance and practice.
I chose the name “Honesty Pill” in reaction to a common issue with performers and artists—people are afraid to take a close look at what they’re doing wrong, even if they desperately want to succeed. My goal is to help people to tackle their issues, so they can achieve their goals. I like to call my approach “swallowing the Honesty Pill.”
I offer practical courses, informative articles, and activities to help you ditch your excuses and really improve.

Did you come to a lot of these improvement processes from your own learning or teaching experiences, and if so, how?

In all of the years I’ve been coaching and teaching, I’ve definitely noticed that everyone is making the exact same types of mistakes. All of us. Which is actually really good news, because if we are all making the same mistakes, that means that we can all solve those mistakes. In other words, you are not the first person to have an unfocused sound, or issues with your time or rhythm.

Basically, I get paid to watch people think, and that has informed my coaching and teaching and certainly helped me design the programs that I offer today.

And I should be clear, I have personally made all of those mistakes I’m talking about, and also figured out the solutions to them. So if I can do it, so can you.

What are the most common misconceptions that even the most ‘diligent’ of musicians come to you with?

This is an easy one. Whether we’re talking about audition strategy, improving practice habits or creating an online business, even the most diligent musicians don’t start the process early enough, and they wait until it’s “perfect” until they let anyone else hear what they are doing.

And this is understandable, since we are trained to lock ourselves in a practice room seeking perfection. Newsflash––perfection does not exist. Everything is a work on progress, and the only way to really improve is to fail and learn. But most musicians are afraid to do that.

At the time of writing, we are in a worldwide Covid 19 lockdown – a lot of people are finding that they have time to reflect on a lot of things including perhaps addressing musical, technical, emotional and mental barriers to their success. Are there any basic tips or general advice that you can give to help people analyze and address what needs to be worked on?

Obviously, the pandemic has been devastating on so many levels. But I am remaining optimistic, because I believe the bigger the problem is, the bigger the opportunity that comes with it. And that goes for practicing too. We spend so much of our musical lives running around staying “busy” that we never stop to reflect on what’s actually happening in our lives. It’s like one of those snow globes with a little village scene inside…we shake it up and the snow swirls around covering everything. And just when it starts to settle, we shake it all up again.

The lockdown has forced us all to let everything settle, and then stare right at it for a really long time. I’m not sure I have any advice, but I would say that this is a great opportunity to get used to slowing down, to being more mindful in the practice room as well as in our daily lives.

Can you talk a little about how your coaching process works? And has this changed a lot since we have all now moved online?

My coaching hasn’t actually changed much at all since Covid-19. I started coaching online three years ago when I realized I could reach a much wider audience that way, and help more musicians achieve their goals.

If I had to notice one change, it would be that so many online barriers that existed before the pandemic have been completely torn down. Three years ago most people had never logged into a digital classroom in their lives, and now that has completely shifted. Which I think is one of the silver linings in this situation.

What are the areas that you have addressed yourself by taking the Honesty Pill?

Great question. Full confession here––there is nothing in my teaching or coaching that I don’t do myself, every day. I still record myself. I still have a practice buddy. I still use a practice chart. These tools and skills are for life, not just for while you are in school or trying to get a job.

The idea that we can ever be “done” mastering something is misguided. It’s not like one day there is a knock on the door of your practice room and someone hands you a certificate that shows you are finished working on your rhythm or articulation.

All of this is to say, the fun part of mastery is the journey, and while we’re all on different points along the way, we are all on it together.

How can people get in touch with you?

I’m on all of the usual social media platforms:
Website: www.honestypill.com (join my mailing list to get in the loop on free trainings and resources)
Facebook “Honesty Pill” group: https://www.facebook.com/groups/honestypill/
Instagram @honestypill

Chris’ Online Business Accelerator is still enrolling until 5th July, so please do also check that out: https://honestypill.com/online-business-accelerator/

You may also be interested to check out Chris’ interview talking about all-things trumpet here.


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]

Design Innovations : Markus Arnold

The challenge of adding resistance to the mouthpiece buzz is one that a number of people have tackled, but always with big compromises to be made. German trumpet player, educator and designer, Markus Arnold talks to me here about his journey in designing the acclaimed ‘Buzz-R’.

Can you give us a little background to starting this design process?

My father taught me how to play trumpet at an early age. Since then I’m playing professionally in very different styles of music (classical music, bigband/jazz, german/austrian folk music, etc.).I also do workshops, band/orchestra coaching, clinics and private teaching.

The Buzz-R is handmade out of high quality wood and was developed in cooperation with a woodwind instrument manufacturer. We tested quite a few different sorts of wood and after a while we found the perfect one in terms of vibrance, resistance and longevity. The form of the product is designed ergonomically so the Buzz-R is easy and comfortable to hold. 

What are the primary purposes of the Buzz-R?

First of all, the main concept of this training device is added resistance. The mouthpiece alone makes it quite hard to produce a relaxed buzz. There’s much more embouchure and lip tension needed than if you would play your actual instrument. Especially Kids and Beginners are having a hard time with this lack of resistance. I think that buzzing the mouthpiece should feel like playing the instrument. And that’s why the Buzz-R works so well. You can adjust the degree of resistance, depending on your individual taste, with closing one hole or one-and-a-half or letting both holes open for a freer feel of blow.

One other great feature is that you can practice almost everywhere. Because of its quiet sound and small size you can use it in the car, on a trip, on holidays and at home. Especially whenever it is unable for you to bring your instrument with you.  The Buzz-R is also excellent for warming up. 

What challenges did you face along the way with this design process?

Of course it can be very difficult for a family company to grow and compete with the big brands. But our strong spirit and love of detail  helped us to make brass players from over the world become better players. We’re receiving messages everyday from happy customers, telling us about their progress. That’s a very satisfying feeling!

How long was the process from initial conception to the product reaching the market?

The process was quite long. I thought about the idea for over 20 years. And this idea wasn’t commercial at all in the beginning. I built the first example for myself after experiencing positive effects from buzzing the mouthpiece with added resistance, especially with wood. And so the “Buzz-R” was born. More and more colleagues got interested in the concept so I decided to produce more. 

What were your main ways of launching and marketing the Buzz-R?

In the beginning I was mainly advertising my products through social media like facebook and instagram. It took not very long and big shops like Thomann and Amazon got interested. Meanwhile there are dealers all over the world who are selling my products. And even famous players like Wayne Bergeron or Eric Miyashiro are talking about using the Buzz-R in their workshops and clinics. This is also not too bad 😉

Is there anything that you would differently?

Nothing!

What new developments are you currently working on?

We have a new product available in our online shop, called the “Lipmaster”. It’s a unique training device, which is also handmade out of high quality wood. With the Lipmaster you can train your embouchure and lip muscles easily and isolated, away from your instrument. You can find it on our website www.buzz-r.de.

We’ve also planned to publish a new brass method book in the near future where the concept of the Buzz-R is explained in detail. It will be an innovative compilation of common topics like embouchure, breathing, efficient practice, etc. This book also includes some instructional videos, exercises with funky play-alongs and practice routines.

So stay tuned! 

For further information, please visit www.buzz-r.de


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]

Trumpet Artist Profile: Randy Dunn | 2026 UPDATE

Featured

Randy Dunn is a trumpeter from Houston, TX with incredibly broad experience across diverse musical styles as a performer and educator. He was originally interviewed by John Hutchinson in 2020, focusing on topics including his approach to playing and teaching as well as working on mouthpiece designs with Legends Brass.

As the new author of Mouthpiece Online’s blog, I recently caught up with Randy Dunn for an update. He’s recently published a new book of trumpet exercises, and he’s added a new mouthpiece to his line-up from Legends Brass. (See the full original interview below.)

-I hear you have recently published a new trumpet method book. And is it available online free of charge?

Method book: Trumpet Extreme Upper Register Studies Method Book by Randy Dunn

Yes, the “Trumpet Extreme Upper Register Studies Method Book“, by Randy Dunn, is now available! The exercises found in the first part of my book include exercises that I had written out (by hand) and used with my trumpet students for many years, ever since the early 1980s. The exercises found later on in the book (in Part 2 of the book) are mostly ones that I had written out primarily to use myself in developing and maintaining my extreme upper register (and, those exercises worked very well, since I now have a range that goes up to at least double-high C (always reliably), and sometimes (depending on the day) a little higher than that. I believe that my new book will be very helpful to trumpet players (both students and professional trumpet players) who are working on improving and expanding their upper register, or who (like me) simply want to maintain their upper register skills.

I decided to make my new book available for FREE (my gift to the trumpet world, since I love all of the citizens of that world), and have published it at The Internet Archive (archive.org).  There, the book can be downloaded in PDF form and can either be used on tablet computers (like iPads, etc.) or it can be printed out in paper form by the down-loader.

See the YouTube video about the book release here.

-Since the original interview in 2020, you’ve added a new mouthpiece to your kit, haven’t you?

Yes, last year, in 2025, I added the Legends Git R Dunn flugel mouthpiece, designed by Derek Saidak at Legends Brass. Here is my review of the new piece:

“My search for the best flugelhorn mouthpiece that allows me to easily switch back and forth between my smaller inner diameter rim lead trumpet and classical trumpet mouthpieces (and piccolo trumpet mouthpiece)  is now finally over! Legends Brass has once again exceeded my mouthpiece design expectations with their new .600” Git R Dunn Flugelhorn Mouthpiece. This mouthpiece has significantly increased my flugelhorn upper register range and endurance, and it has also improved my flexibility, all while still getting that beautiful, characteristic flugelhorn sound that I demand.  The unique design of this mouthpiece makes it a mouthpiece that every trumpet/flugelhorn player needs to try.

Legendary mouthpiece designer Derek Saidak worked with me in creating the design for this outstanding flugelhorn mouthpiece. The design of this mouthpiece was inspired mostly by the designs of three other mouthpieces.

The comfortable, cushion rim of the mouthpiece is an exact copy of the rim of the .600” GIT R DUNN Trumpet Mouthpiece that Legends Brass designed for me to use for my classical-type trumpet music and all-around general trumpet playing. And the rim of the GIT R DUNN Trumpet Mouthpiece is exactly the same as the rim of the mouthpiece that I use for lead trumpet playing and on piccolo trumpet, the Legends Brass .600” JT CS Trumpet Mouthpiece (with a rim that is based on a vintage Jet Tone Charlie Shavers model trumpet mouthpiece.)

Many professional trumpet players and advanced student players have described this rim (on the Legends Brass JT CS Trumpet Mouthpiece and the GIT R DUNN Trumpet Mouthpiece) as the most comfortable trumpet mouthpiece rim ever made, and I agree with that. In fact, this rim is so popular that Legends Brass makes the JT CS Trumpet Mouthpiece in several different inner rim diameter sizes, ranging from .590” to .650”. If you are looking for a great lead trumpet or piccolo trumpet mouthpiece with an inner rim size within this size range, I highly recommend that you check this trumpet mouthpiece out in your preferred inner rim size. By the way—the tone quality of this mouthpiece is so beautiful, that you can also get away with using it for all of your trumpet playing needs, not just for lead trumpet playing.  But, if you also want a trumpet mouthpiece that is a bit darker and richer, with a bit more of a robust, orchestral trumpet-type sound, then you will also want to try the .600 GIT R DUNN trumpet mouthpiece (which has a slightly deeper cup, and also has the more open, Legends Chicago backbore that is often preferred by orchestral trumpet players.)

Looking down below the rim, the lower part of the .600 Git R Dunn Flugelhorn Mouthpiece is based on a vintage Parduba 4 & ½ flugelhorn mouthpiece that was designed by Dick Akright especially for me, many years ago. But the new Git R Dunn flugelhorn mouthpiece has a smaller inner rim diameter than the old, Akright-Parduba flugel mouthpiece, and it also has a few other improvements and enhancements that were made to it (Thank you, Derek!) It has a typical, Parduba-style double-cup, with the first cup being shallow and bowl-shaped, which makes the upper register much easier, and also add just a hint of sparkle to the sound. The second, deeper cup of the mouthpiece is a typical, funnel-shaped cup that is found on virtually all flugelhorn mouthpieces (and French horn mouthpieces), producing that standard, dark, fluffy sound that you expect to hear from a flugelhorn, and also greatly aiding the notes in the lower register. The heavy blank with added mass that is used on this mouthpiece also helps to darken the sound, and it also stabilizes the notes in the upper register, making them easier to play.

Although the flugelhorn is really an alto instrument, several well known later period flugelhorn players sometimes play this instrument in the soprano register, and sometimes even going up to the more extreme piccolo-trumpet register. The famous flugelhorn soloist and band leader Chuck Mangione is perhaps the most well-know example of this. The saxophone-playing leader of a jazz quintet that I often work with loves Mangione tunes (which usually soar up pretty high above the staff), and in that band, we often play a half a dozen of Mangione’s tunes on our gigs. The Legends Git R Dunn flugel mouthpiece enables me to play those Mangione tunes easily, even at the end of a 3-hour gig.

I have also used the Git R Dunn flugel mouthpiece while playing in big bands, both for flugelhorn solo work, and with the entire section playing flugels, and the results are always excellent.  I have had many people comment on how beautiful my tone quality on flugelhorn is with this mouthpiece, with several (including trumpet/flugelhorn players) saying that it is the most beautiful flugelhorn sound that they have ever heard. What’s really amazing is that on an improvised flugelhorn solo with a big band, I can soar up into the extended upper register (like around F, E, or G above high C) and it still sounds beautiful and flugelhorn-like. I love watching the faces of audience members and my fellow band members when I do this. Their jaws drop open and then eyes open wide with surprise and delight when they hear me play in the upper register on the flugelhorn, which is something that nobody expects.

The Git R Dunn flugelhorn mouthpiece makes it so much easier for me to play the flugelhorn, and I enjoy playing that instrument so much more now that I have switched to that mouthpiece.I’ve had to play a couple of gigs with it when I was kind of  sick (You know, “The show must go on”), and yet it was still easy for me to play, even though I was a bit ill.  With the other, older flugelhorn mouthpieces that I had used in the past, playing under those kind of conditions would have been a real struggle for me. Thank you, Legends Brass!

The .600” Git R Dunn flugel mouthpiece is readily available in the three most common flugelhorn shank tapers: (1) Large (Standard/Yamaha); (2) Small (Bach); and (3) French. I personally have this mouthpiece in the Large taper, since the two flugelhorns that I use most often have this taper. But Legend Brass also made another copy of this mouthpiece for me that has a cornet mouthpiece taper on it. I use the cornet mouthpiece taper version of the Git R Dunn flugel mouthpiece when I’m playing on my vintage 1961 Martin Magna flugelhorn, which I use when I want to feel like Miles or Wallace Roney. Some of the older vinage flugelhorns from the late 1950s and early 1960s had receivers that required flugelhorn mouthpieces with the same shank taper as a cornet mouthpiece. (An interesting fact about flugelhorn history!)

The .600” Git R Dunn flugelhorn mouthpiece is extremely versatile, and I have used it on all kinds of gigs that require flugelhorn (or that I have chosen to play flugelhorn on), including gigs with big bands, jazz combos, horn bands (Rock/R&B/Funk/etc.), church gigs, and more. And, I would even use it in orchestras for post horn solos, or for orchestral pops concerts, when the need arises. So be sure to check out this mouthpiece and give it a try:  You’ll be glad that you did!”

Legends Git R Dunn Flugel Mouthpiece
Legends Git R Dunn Flugel Mouthpiece

See the YouTube video review here.

Original interview with Randy Dunn from 2020, by john hutchinson:

Trumpet Artist Randy Dunn

What drew you to the trumpet as a child?

For some reason, I was always highly interested in music as a child, in spite of the fact that neither of my parents were musicians.  There were a couple of things from my early childhood that I suspect were responsible for my great general interest in music.  In the early 1960s, when I was very young, our family had bought a tiny, wind-driven (by a small electric motor) portable, table-top reed organ that had medium-small-sized black and white keyboard keys (they were probably just the right key size for my little 5-year-old fingers) and it also had two rows of accordion-like chord buttons and bass buttons that played a limited selection of chords that were arranged in an order that made sense regarding key relationships.

Even though this little organ was bought for the amusement of the entire family (to be used sort of like a toy), I was the member of the family who was playing with it most of the time, and I spent hours and hours entertaining myself with it.  This tiny organ was made for use by non-musician amateurs, and it came with some little songbooks that had some easy, familiar songs in them (folk songs and old pop songs, mostly) and I sort of taught myself to read music by playing the songs in those books, and I also enjoyed just freely improvising on those keys.  My improvising probably wasn’t that great, I’m sure, since I knew nothing about music theory at the time.  But it was at least good enough to please and entertain the child version of myself.  It just occurred to me for the first time in my adult life that I might be able to find some pictures and other information about that little organ online, and I did!  It was a Sears Silvertone Model 603 Organ (no doubt ordered out of the Sears catalog.)  Here is a link to a YouTube video of that organ in action:  https://www.youtube.com/watch?v=cORy05zY_gU  

I also had a small record player when I was very young (my parents must have bought it for me when I was around 5 years old), and I also had a lot of vinyl records (singles and full albums) to play on it, and I really loved listening to those records over and over, and spent a lot of time doing that.  I had vinyl records with all kinds of music recorded on them, including music genres such as “kiddie music” recorded specifically for children,  pop music, movie soundtrack albums, classical music albums, easy listening music (“elevator music”), and also some jazz and jazz pop music.  This was the early to mid 1960s, so there was still a good bit of new jazz-influenced popular music being recorded at the time.  I didn’t spend very much time listening to the children’s records that I owned, instead choosing to play all of the other records over and over again and really enjoying them all, especially the ones that featured orchestras and big bands.

So, I think having both that little Sears organ (which was almost like a toy) and that little record player when I was a young child really taught me how to listen to music and also encouraged me to mentally analyze music that I was listening to, even though it was in a musically uneducated way. 

Later, when I was about to turn age 11 and was also about enter the 6th grade in public school, I knew that I wanted to play an instrument in the school band, but I had a really tough time deciding on which instrument I wanted to play, since I liked all of the instruments.  I remember really liking the clarinet a lot back then, and I had thought that was the instrument that I wanted to play.  But my parents talked me into playing the cornet instead, for some reason.  They had a couple of friends who had been in the school band who had played the cornet, and I think they also might have just really liked the cornet and trumpet better themselves.  So, I became a cornet player (and later, a trumpet player) more or less by random accident.

Trumpet Artist Randy Dunn

Did you have any particular early musical influences or heroes?

Growing up as a young child in the 1960s, I heard a lot of great trumpet music on the radio that I really enjoyed (much of which I heard well before I ever even played the cornet or trumpet), since there were a lot of hit singles that featured the trumpet back then, such as the hit single recordings by Al Hirt and by Herb Alpert and the Tijuana Brass.  And, I also remember really liking the trumpet and brass section on those early Blood Sweat & Tears hits (Lew Soloff in particular later became a huge influence on my trumpet playing.)  Those artists continued to record big hits into my early days of playing the cornet (trumpet) when I was in junior high school, and I sometimes tried to play their music myself by ear, or at least what little of it their music that I could play back then.  Herb Alpert’s hits were heard everywhere at that time, and so everyone knew them and recognized them all, and the same was true with some of Al Hirt’s recordings.  Once I began playing the cornet myself, I checked out a couple of Al Hirt’s albums from our local public library (on the recommendation of my middle school band director), and I listened to those recordings over and over again, and I really loved every Al Hirt track  that I ever heard, even though I was a very weak young cornet/trumpet player at the time, and wasn’t yet serious about playing the trumpet myself.

Entering into high school was a big musical game-changer for me.  That’s when I started buying and listening to lots of albums recorded by Doc Severinsen.  My high school band director and Doc had met one year at the Texas Music Educators Association convention one year before I had ever entered high school and they had become good friends.  As a result of that friendship, Doc played concerts as a featured soloist with my high school band every year that I was there, in addition to also playing those concerts several years before and after I was in the high school band.

When I was still in middle school (or “junior high school”), I had heard Doc play a live concert with the high school band and I was totally mesmerized with how beautifully and musically Doc played the trumpet, and that’s when I became Doc’s fan for life.  So Doc is definitely a big personal mentor and inspiration of mine, and I have had the pleasure of getting to visit with Doc and reminisce about those times on several occasions over the years when Doc had come to Houston to perform with various different professional musical ensembles that he has led.

While I was still in high school, I also starting listening to a lot of Marice André albums, and as a result of that listening, he was a great influence on my piccolo trumpet playing once I added that instrument to my collection when I was in college.  I also first began listening to a lot of great recordings of many of the standard trumpet concertos (recorded by many different soloists) when I was in high school, such as concerti by Hummel, Haydn, Torelli, Telemann, Franz Richter, and others.  Also around that same time, some of the other, older high school band students had introduced me to the music of Bill Chase (and his trumpet-heavy jazz-rock band, Chase), as well as to the big band music of Maynard Ferguson, which resulted in my loving and idolizing those great trumpet players as well.  And, of course, I was also also staying up late and watching and listening to Doc Severinsen play with (and lead) the orchestra for the Tonight Show with Johnny Carson on TV most week nights.

Rafael Mendez was another great trumpet soloist whose recordings I had also listened to a lot beginning when I was in high school.  Also in my high school days, I became a big fan of the group, Chicago (beginning my freshman year in high school), and later, Tower of Power, and both of those bands had great horn sections that featured some fine trumpet playing.  And, I also began to really like and appreciate the music of Henry Mancini back then, which included Mancini’s great trumpet sections and soloists, such as Bud Brisbois and Conte Candoli, and Mancini’s music was heard in many movies and television shows of that time period.  Mancini even had his own weekly musical TV show called The Mancini Generation during that time period.

I definitely need to mention that Bob Odneal has been a huge influence on my lead trumpet playing.  I have known Bob and have been listening to him play for many years, ever since I was in high school (Bob and I attended the same high school in our hometown of Baytown, Texas, although he is older than me, and therefore attended that school—and played concerts with Doc there—before I did.)  I have really learned a whole lot from Bob throughout my entire lifetime, and I still continue to learn things from him.  In addition to Bob being an extraordinary trumpet player, he is also a really great teacher and band leader.

Going from late high school into college, I added even more trumpet heroes to my list of major influences, including Clifford Brown, Jon Faddis, Marvin Stamm, and Arturo Sandoval (during his days in Cuba when he played with the band, Irakere.)

While I was in college, I also began to gravitate much more toward classical music (which became my primary performance genre throughout most of my life),  and in that genre, I was most greatly influenced by my college trumpet professor and former Houston Symphony principal trumpet, James Austin, who is to this day, my idea of what the perfect symphonic trumpet player should sound like.  But Bud Herseth, Vincent Chicowicz, and Gerard Schwarz and several other trumpeter players who were playing with the major symphony orchestras at that time also greatly influenced me as a classical trumpet and orchestral trumpet music performer, along with Maurice Andre, of course, who is the gold standard of piccolo trumpet performance.

There are so many other great trumpet players whose music has touched and influenced me greatly, and I think that, as trumpet players, we are each a product of everything and everyone we have ever listened to.  But the trumpet players I mentioned above are the ones who have had the biggest influence on me, especially in my earlier years, from childhood up through early college in particular.

What have been some of your career highlights to date?

Probably the most enjoyable moments of my career have been getting to perform often with some of Houston’s finest classical and orchestral musicians, including many who perform with the major local professional orchestras, such as the Houston Symphony, Houston Ballet, and Houston Grand Opera orchestras, and also with musicians who are members of the great local professional theater orchestras.  But, it has been equally rewarding for me to be able to perform with some of the Houston area’s greatest jazz and pop musicians.  Houston has some of the finest musicians you will ever find, in all genres.

I have also really enjoyed getting to perform in orchestras and bands with some well-known singers and instrumental soloists, including Johnny Mathis, Casey Abrams, Doc Severinsen, Dennis Dotson, Kirk Whalum, and many others.  Since I got to play concerts with Doc Seveinsen back when I was in high school, that experience has been hard to top!

I have also done some interesting film and television music recording work, including playing the fanfares in the 2015 BBC-TV movie, The Dresser, staring Anthony Hopkins and Ian McKellan, and also writing and performing a trumpet fanfare duet for a Zappos Shoes television commercial.  I have also worked as a composer and music producer for several up-and-coming film directors both Houston and Austin, Texas, writing and producing music for some short films (made for film festivals) and some television programming.  I even played trumpet and flugelhorn (among other instruments) in some of that film and television music that I produced.

I really enjoy playing a lot of different types of music (which keeps me from getting bored), including classical chamber music, orchestral music, big band jazz, small jazz combo, pop/R&B/funk/rock, and latin music.  And speaking of latin music, I’ve even played in bands in which all of the other band members were fluent in Spanish (since it was their first language) except for me, and the rehearsals and performances of those bands were conducted completely in Spanish.  Fortunately, music is the universal language, which makes communication among musicians easy, in spite of any language differences.

Trumpet Artist Randy Dunn

As an experienced educator and player, have you found that your approach to playing and teaching the trumpet has changed over the years? 

I am a retired music educator, having taught band and music for many years in the public schools in Texas.  Before I retired from teaching, I was also working part-time as a free lance professional trumpet player all those years that I was a teacher (the trumpet gigs were mostly in the evenings and on weekends.)  Before becoming a life-long career classroom teacher, I also spent four years working as a full-time private trumpet teacher in the Houston area.  During that time period, I was teaching between 90 to 110 trumpet students each week, while also simultaneously working as a free lance trumpet player.  (I had also taught trumpet lessons part-time my last couple of years in college.)Even though I am retired from teaching, I still enjoy continuing to work some with band and music students from local high schools, middle schools, and colleges, in addition to continuing to work as a free lance professional trumpet player.

The biggest change to my playing and teaching the trumpet over the years is that I now personally spend a lot less time on practicing warm-ups, etudes, and technical exercises (you know, all of that “trumpet stuff”), and I instead spend a lot more time practicing repertoire for upcoming concerts and other performances.  It is important to practice all of those trumpet techniques basics, but you encounter a lot of those in the repertoire you play anyway (especially if you are playing professionally.)

I do continue to play certain exercises on a regular basis (see next question for more details), but I often divide and spread those routine exercises out over 2 different days rather than practicing all of those different routine and technical exercises all on the same day (which, if I did practice them all on the same day, might leave little time for me to practice my performance repertoire, which is much more important, since that’s what I’m getting paid to play.)  Splitting up my routine practice exercises and warm-ups and spreading them out over a couple of days also makes my practice days more interesting, since every day’s practice is a little bit different, with more variety.  (Again, see the next question for more details about how I do all of this.)

As a performer, are there any particular routines that you follow to keep yourself in good shape for performance? How do you keep on top of your trumpet playing while you are traveling or really busy?

There are two very important things that I do to keep myself in good shape for trumpet performances:  

(1) I make sure that at least 50% of my daily trumpet practice and playing is done in the middle to low register and/or playing very softly.  This is an important technique for developing and maintaining good endurance (and also important for a strong upper register, which seems to be closely associated with good endurance.)  This type of daily practice (when at all possible) has been recommended to me by many great trumpet players from all music genres, from classical and orchestral to jazz and beyond.

I keep a written practice journal that keeps running totals of how much time I have spent so far each day practicing soft/middle-low register stuff:  I draw a smooth circle around the numbers of minutes (or hours and minutes) that I have written down for this type of practice that I have done.  And, I draw a jagged, spiky circle around the minutes of loud and/or high register practice that I have done in each of my practice sessions.  If I do a combination of the two types of playing during the same practice, then I circle the practice time for that session by making part of the circle smooth, and part of the circle spiky-jagged, approximately indicating the ratio amounts of the two types of practice done. After my last practice session of the day, I add up all of those minutes (from my two running totals of those two different types of practice) in order to get a grand total of hours and minutes that I practiced that entire day, and I write that total practice time amount in the left margin, next to the day’s date in my journal, and then I draw a rectangular box around the grand total of hours and minutes that I practiced that day.

(2)  The other thing that is important is that, instead of practicing just once a day for a long time period, I like to practice in several relatively-short practice sessions throughout the day (always beginning my first practice session of the day fairly early in the morning), and then I rest and don’t play the trumpet for at least as long as I just practiced in the previous session before I begin the next practice session of the day.  And, the moment when my lips are starting to feel either a little tired and fatigued, or “wobbly,” or maybe even feeling a little bit painful sometimes, then I stop playing immediately and take another long rest (or, I’ll stop practicing for the rest of the day, if my lips are too tired, or if I feel like I have practiced enough that day.)

As for what I practice, I probably spend about 90% of my time practicing music for upcoming performances, since that’s what I’m getting paid to play.  It’s very easy to get distracted with practicing too many warm-ups, technical studies, etudes, lip-slurs, and long-tones, and other “trumpet player stuff.”  Nobody will ever pay you to play any of those things!  Not that those things don’t have value, because they do—I admit that I do think that they are important, and so I still spend a little time practicing and playing them—but no more than about 10% of my daily practice time on them, usually.  Younger and developing trumpet students may need to spend a little larger percentage of their practice time each day playing these types of exercises though, in order to learn those techniques that are still new to them and therefore haven’t mastered yet.  (That’s called “paying dues” and developing the basic skills of fine trumpet playing.)

I always warm up carefully each day, starting on second-line G (with at least a fairly long note, getting the best, most centered tone quality possible), and then I gradually expand my way down lower and then up higher throughout the total commonly-used range of the trumpet (or maybe even higher, if I am about to play some lead trumpet music or something that goes extremely high.)  I do these expanding-throughout-my-entire range warm-ups with either some slow scales and/or arpeggios, or sometimes with expanding lipslurs and/or lip glisses (octave glisses), very carefully moving into the extremes of the lower and higher registers, and concentrating on relaxing and using as little mouthpiece pressure as possible, while getting the most beautiful, well-centered sound I possibly can.

I have a list of several things in my practice routine that I like to do regularly.  When I was a student (especially in college), I would practice and play each of those things every day, if at all possible.  But, after many years of playing all of those basic trumpet techniques, I now usually split them up and spread them out over 2 days (occasionally even having to spread them out over more than two days) so that I don’t spend more than 10% of my daily practice time on warm-ups and technical studies (“trumpet stuff.”)

I do have a set of “trumpet technique basics” that I like to start my practice day with, not only as a warm-up, but also to focus my practice, and to maintain all of the basic skills that I need to play the trumpet the way that I want to be able to.  Each day, I practice each of those trumpet technique basics on only one pitch (or “key”) in all possible octaves (or, I might instead stick with that same pitch/key for two days, if I split this routine up and spread it out over two days.)  After I have played through all of these exercises on that particular pitch or key, then I will move on to a new pitch to focus on for the next new day’s warm-up and routine practice.  (I do this with all twelve possible pitches/keys, going through them in the order of the circle of fifths.) 

Here is that list of daily (or semi-daily) essential exercises and skills for trumpet playing that I practice every day (or, sometimes over the span of 2 days, if I split this routine approximately in half and do only half of it a day over the span of 2 days), and I practice these regularly in order to keep my basic trumpet skills and techniques in good condition:

1.  Longtones and Tonguing Exercises—I play long notes very softly on the “pitch of the day” in all octaves possible, holding each of these notes for as long I can in one breath (I count the number of seconds I hold each note), until I can no longer hold the note out without still being relaxed (and then stopping before I would have to squeeze the last of the air out in order to go any longer.)  I do this a couple of times with each note (in each octave), and then I also play a long, single tongue exercise on that same note, starting with a whole note, and then going to shorter and shorter note values (whole note, 2 half notes, 4 quarter notes, 8 eighth-notes, 16 16th-notes, and then ending with a whole note with a fermata over it.)  I then play various common double-tonguing and triple-tonguing rhythmic exercises on that same note.  I repeat this process with the same pitch in every octave that I can comfortably play it in.

2.  4ths and 5ths—I slur between the “note of the day”, up a perfect 5th, then up a perfect 4th from there, etc., playing these 2 different pitches in all registers (also taking them down into the lowest register possible.)  These 2 pitches function like tonic and dominant, or the 1st and 5th pitches of a scale, and therefore, these intervals are often found in music.  Then, I start with the “note of the day” and this time, I slur up a perfect 4th first, then up a perfect 5th from there, etc., playing these 2 different pitches in all registers possible.  In this case, these 2 pitches function like dominant and tonic, or the 5thand 1st pitches of a scale.  [In other words, my “pitch of the day” serves as both tonic and dominant in these 4ths and 5ths interval exercises that I practice.]

3. Octaves—I play octave jumps, up and down, using the “pitch of the day,” playing these cleanly in all possible octaves, slurred, tongued, and also glissed.  For even more of a challenge, I’ll jump up and down between all possible octaves that I can play of that “pitch of the day.”

4.  Scales & Arpeggios—On the “pitch of the day,” I play a scale and an arpeggio, playing each in as many octaves as possible, first by memory, then I either play some arpeggio (chord) studies from the Arban book, or a I simply make up my own, similar arpeggio/chord studies.  The “scale and arpeggio of the day” that I play as part of my practice routine is always selected from one of the following pairs:

 (Notice that the first five pairs listed below are scales and arpeggios that are often used with the same harmonies or chord symbols.)

●Major Scale and Major (Triad) Arpeggios (maybe with a little bit of Major 7th chord arpeggio also);

●Mixolydian Scale (Dominant 7th Scale) and Dominant 7th Arpeggios;

●Minor Scale—I like to mostly practice the Dorian Minor scale, because that’s the minor scale that I use most often in jazz improvisation (but I also sometimes play the other minor scale forms a bit:  Melodic, Harmonic, and Natural Minor scales) and Minor (Triad) Arpeggio, and also the Minor 7th Arpeggio;

●Diminished Scale (also known as Octatonic Scale or Whole-Step—Half-Step Scale) and Diminished 7th Arpeggios

●Whole Tone Scale and Augmented (Triad) Arpeggios;

●Blues Scale, and Pentatonic Scale, and also Stacks of Perfect 4ths (the stacks of 4ths, which represent extended tertian harmonies, such as 13th chords—are practiced here instead of the usual arpeggios)

●3rds Studies (scales with broken 3rds), plus Clarke’s Technical Studies (my choice), plus favorite “licks” or I’ll review some of the most technically challenging scales and arpeggios of my choice.

I eventually work my way through all of the “scales and arpeggios” pairings listed above, playing each set in all 12 keys/pitch centers.  Since there are 7 of these pairings, and 12 different pitch centers (or keys) for each one, it takes me at least 84 days to work my way through all of them, if I do a new one every day (7 x 12 = 84.)  So, in other words, it takes me almost 3 months—minimum–to complete this cycle.  If I spit the daily routine in half, it will take me twice as long to work my way through all of these routines.  I have a deck of color-coded index cards with each of these scale+arpeggio sets in each key/pitch center written on them that I use to help me keep track of which one I’m currently on, along with notes about which ones I have practiced on each day that I keep in my practice journal.

5.  Interval Studies—from the Arban book, etc.  (These are extremely important in developing and maintaining accuracy in playing.)  I do these starting on the “pitch of the day” only, using the “scale of the day” from my practice routine.

6.  Clarke’s Technical Studies by Herbert L. Clarke (the study of my choice from this book—I often rotate these), played in the “key of the day” only, but in all of its possible octaves.

7.  Chromatic Scale, starting on the “pitch of the day,” going up as many octaves as possible.  (It’s important to be able to play chromatic runs starting on every note, and the First Study from Clarke’s Technical Studies is also a great study for achieving great chromatic scale technique.

8.  Range Practice—For playing in the extreme upper register, I will play some exercises (such as octave jumps—slurred and tongued—or arpeggios or scales or favorite licks) starting with one that goes up to high C above the staff, then going up from there by half-steps until I go as high as I can possibly play.  For me, that’s usually about a double-high C, but sometimes a little higher than that, and on some days it’s a little lower (if I’m having a particularly bad chops day.)  I rest frequently, as necessary in order to avoid tiring my lips out and injuring myself.  I usually do these range exercises going up to double-C every day, but on the rare day that I might be having a “bad chops day,” I might skip these that day.  I know some very fine trumpet players who also have great endurance and a great upper register who only practice these types of range exercises every other day.  So you have to do it the way that works best for you personally.

9.  Lip Glisses (Glissandi)—These sort of go along with the Range Exercises listed above. I start on C in the staff and gliss up to high C, glissing up and down several times, usually a total of eight times without stopping in between each one at these different dynamic levels:  mf, mf, pp, pp, ff, ff, mf, mf.  I then continue going up chromatically by half-steps, doing the same thing, but moving up gradually  to higher and higher notes, until I am playing octave glisses up to double-high C (or as high as I can go on that particular day, at least.)  NOTE:  When I was younger, I spent a lot of time practicing lower lip glisses, going through all 7 lip-slur fingerings and starting on the lowest note that I could play with each fingering, and gradually adding more and more notes to these lipslurs/glisses, working my way up to playing 7-note glisses with each fingering, then later even 8-note and 9-note glisses.  Those are really great exercises for learning all of the notes in the harmonic series for each of the seven fingering combinations of the trumpet.

ADDITIONAL NOTE:  When I was a student (in high school and college), I spent a lot more time practicing the “trumpet basics” that make up my daily routine, but that’s because those skills were new to me then (or at least newer), so I was still learning these skills then and developing those basic techniques and establishing the muscle memory needed to perform each of them well and accurately.  In my student days, I spent a lot more time practicing long-tones, lip-slurs, and scales (and later, also arpeggios.)  Every great professional trumpet player I have every known, no matter what age and generation (trumpet players from all music genres, from classical/orchestral to jazz and beyond) has stressed the importance of practicing these things, and I have personally heard many of them warming-up with them and practicing them.

As I got older and had learned my lip-slurs extremely well (along with their accompanying harmonic series notes) and was therefore very skilled at playing them, to the point where they were almost boring, and required little concentration or effort from me when playing them, I then stopped practicing so many lip slurs, relying instead mostly on arpeggio studies to help me to maintain my lip flexibility in much the same manner, only I also get arpeggio fingering technique practice in with those exercises.

Throughout high school and college I also spent a lot of time practicing lip trill exercises in all registers (starting out with the lip trills in the middle and low registers only at first, in my early high school years.)  But, again, after I had gotten really good at those and they had become extremely easy for me to play (even the lip trills in the upper register), I no longer spent much time practicing lip trills, with the exception of the ones that I would encounter in concert and gig literature that I would be playing (lip trills are especially common in big band music, of course.)

Also, as a student, I spent a lot of time gradually learning all of the different common scale and arpeggio forms listed above in my practice routine.  Beginning a little bit in middle school and continuing into high school, I had learned all 12 major scales and major triad arpeggios, spending a couple of weeks on mastering each one of these 12 scales (along with the corresponding arpeggio) when I was in my first year in high school so that I could learn them really well and in order to play them really fast if I needed to (or wanted to.)  Then, after learning all 12 of them (in all keys), I would quickly play through all of my major scales and arpeggios every day, starting with the lowest one (F# or Gb) and going up chromatically by ½ steps to as high as I could go playing these scales and octaves two octaves each, and then I would play the remaining scales/arpeggios that were then above my two octave range only one octave each (or, one octave “plus”–with a partial extra octave, as my young high school range would permit.)

Late in high school, I started to learn some minor scales and arpeggios a little bit, but I didn’t really woodshed those and learn them really well (along with the other scales and arpeggios I mentioned above) until I began my college years of study and realized that I still had a whole lot more to learn in order to achieve really good, comprehensive, basic trumpet technique.

Technology has produced the biggest changes in the way that I practice now compared to when I was younger.  Metronome and tuner apps, instead of actual metronomes and tuning machines that I used in the pre-computer days when I was younger, as well as music audio and video files that can be instantly downloaded or streamed from the internet have all been major game-changers in the way that I practice now.  Also, some other music-related computer programs, such as Digital Audio Workstation (DAW) programs have also changed the way that I sometimes practice and make music now.

As far as what I do to keep my chops and my trumpet playing in good shape when I’m traveling or really busy:  I always travel with at least one instrument (Bb), even if it’s only my cheap little Bb pocket trumpet.  No matter where I travel to, I always manage to find a some place there where I can get some practicing done without disturbing others.  Over the years, I’ve practiced in many empty hotel ballrooms and meeting rooms, in empty classrooms of schools and universities, in empty Sunday school rooms and sanctuaries in churches, in parking garages, in empty stairwells, in empty office buildings—after office hours, in empty wooded areas, etc.  When traveling, I find myself constantly analyzing every place that I see and evaluating it for its use as a temporary practice room or practice space.  

If I’m staying in a hotel when I travel, I sometimes might do a little bit of my warming up and such in my hotel room, but if I do, I’ll point my trumpet bell toward something that will either absorb or dissipate the sound somewhat (pointing my bell toward pillows, or chair cushions, or heavy clothing, etc.)  If I’m staying with relatives or friends who live out of town, I’ll usually wait to let my really loud and really high practicing rip lose when everyone else leaves the house for some reason or another.

Before I retired from teaching, I always kept my pocket trumpet in my car, where I often played warm-ups and chop-builders on it (long-tones, lipslurs, etc.), as well as tonguing exercises and other things on it, sometimes even playing these one-handed while I was driving to and from work (which was usually about a 30-minute trip each way for me, depending on the Houston traffic.)  Every time that I had to stop at a traffic light, or got caught in a stop-and-go traffic jam, or got stuck behind a train that was either very long or that was stopped on the track, I got some really good practicing in.  (There was a train track very close to the school that I taught at.)  When I traveled to conventions, I would often carry my pocket trumpet in a small gig bag and then put it in a backpack that I carried around with me.  

Other than practicing, I sometimes “set my chops” to embouchure position (but sort of relaxed—not too tense) during times when I’m sitting idle, but am unable to play the trumpet (in meetings, in waiting rooms, watching a TV show, etc.) I have always made the most of every minute that I have had to practice, even while I was still working a day job.  Any time that I had before school, or during my lunch time (after I had finished eating) I would use these opportunities to get in a little bit of practicing (every little bit of practice that you can do helps.)  Always getting my first practice session of the day done as early in the day as possible really helps with keeping my chops in shape also.

Trumpet Artist Randy Dunn

Can you tell us a little about the current relationships that you have with manufacturers? What was the process like, working with Legends Brass on new mouthpieces? How have these new mouthpieces helped your trumpet playing?

Working with Legends Brass on my signature custom mouthpiece, the GIT R DUNN trumpet mouthpiece, was a wonderful experience for me.  Derek Saidak and his wife, Leslie (who own and operate Legends Brass) are both mouthpiece-making geniuses, and I am extremely impressed with the way they run their business, their great selection of unique mouthpiece designs that can meet the needs and preferences of just about any trumpet player, and their amazing attention to detail and creativity.

Derek designed the GIT R DUNN mouthpiece for me to use primarily for me to use for classical and orchestral trumpet playing on my larger trumpets, such as my trumpets in the keys of Bb, C, D and Eb (not for piccolo trumpet use.)  Before Derek began designing that mouthpiece (at my request), I had recently switched to using two different Legends mouthpieces for my lead trumpet playing (and similar playing) and also for my piccolo trumpet playing.  Both of these Legends mouthpieces have different advantages and different qualities in the way they sound and play and are therefore each best suited for different situations.  (See below for more information about this.)

I loved the comfort and the feel of my Legends JT CS .600” lead trumpet mouthpiece so much (which is my primary lead trumpet mouthpiece) that I wanted to play on it all the time!  And, even though the sound is great on it, it doesn’t quite get that characteristically orchestral trumpet sound that virtually all professional orchestra and classical trumpet players typically get.  Also, it was always difficult for me to quickly switch back and forth between my lead trumpet/piccolo mouthpiece and my old “classical” mouthpiece, because the feel and the blow of the two mouthpieces were so different.  This had really become an issue with my playing in recent years as I began to play a lot more different kinds of gigs requiring me to play a lot of different styles of music (classical chamber music, orchestral music, big band, jazz, pop, etc.)   Similarly challenging was the fact that more churches (and therefore more church gigs) were moving toward blended services that required me to quickly switch back and forth between playing more contemporary lead trumpet-type jazz and rock style music to playing traditional classical, baroque, and romantic style music, all within the same church service, and often switching back and forth between the two different styles.

To solve this problem, I wanted a special custom mouthpiece that had the same rim, throat, and venturi cylinder design as the  Legends JT CS .600” “lead trumpet” mouthpiece that I had been using for lead trumpet and piccolo trumpet playing, but I wanted the new custom mouthpiece to have a more open, broader, darker-sounding backbore (like the Legends Chicago backbore), and I also wanted this new custom mouthpiece to have a little bit deeper cup (but not too deep.)   Derek and I both believed that these changes in the design would fatten up and darken the sound a bit more, yet would still provide good support in the upper register as well as enable good endurance, all while still being able to produce a rich, fat sound that still produces some “classical” brilliance and richness to its tone.  The result was the new Legends GIT R DUNN .600” trumpet mouthpiece, which I am very pleased with, and I now use that mouthpiece exclusively for my general trumpet playing and practice, as well as for performing “classical” style chamber music and orchestra music.  (I use the GIT R DUNN mouthpiece for everything except for piccolo trumpet playing, lead trumpet playing, and for some jazz solo playing.)  By the way: I know many other older professional classical trumpet players who, like me, played on typical large inner diameter rim trumpet mouthpieces when they were young college students and young professional players, but who now play on much smaller inner diameter rim mouthpieces.

Not long before working with Derek on designing the GIT R DUNN mouthpiece, I had begun using two other Legends mouthpieces that were from the standard Legends mouthpiece catalog.  I was using those two mouthpieces for lead trumpet-type playing and for playing piccolo trumpet, and those are the mouthpieces that I still use exclusively for those purposes.  And now I can’t imagine having to use any other mouthpieces for those types of playing.

For most of my lead trumpet playing (probably about 80% of the time), and for all of my piccolo trumpet playing, I use the Legends JT CS .600” mouthpiece, which is inspired by the classic Jet Tone Charlie Shavers model mouthpiece, but with some significant improvements that Derek made to the original design.  This mouthpiece has the most comfortable rim of any trumpet mouthpiece I have ever played on in my many years of trying hundreds of different trumpet mouthpieces.  And, it is so easy to play on, giving me great results with less effort, and also encouraging me to relax more when I’m playing.  It gets that big, fat sound that I want on piccolo trumpet without requiring me to work too hard, greatly improving my endurance on the piccolo trumpet as well as making the upper register much easier.

And that same Legends JT CS .600” mouthpiece has a similar effect when I use it for lead trumpet playing on the standard Bb trumpet.  On that instrument, it also gives me a big, fat, beautiful sound that requires less effort than any of the lead trumpet mouthpieces that I had ever used or tried before.  Likewise, this mouthpiece also greatly improved my lead trumpet endurance, and it also really stabilized my extreme upper register (from normal lead trumpet range up to double-high C and a little beyond), making my extreme upper register playing so much easier and much stronger-sounding and more beautiful-sounding than every before.  The tone quality of this mouthpiece is so great in all registers that I also usually use it for playing jazz trumpet solos, in addition to using it as a lead trumpet mouthpiece.

Sometimes when I’m playing lead trumpet, I will instead use the Legends RM 16S .595” mouthpiece (which I use for playing lead trumpet about 20% of the time), which is a mouthpiece inspired by the classic Rudy Muck mouthpiece, but with some very important improvements that Derek made to the original, classic design.  Like the Legends JT CS, the Legends RM 16S is also very comfortable, with a wide, cushion rim.  And, the rim of the RM 16S feels like it is the same size as the JT CS, even though its inner-rim diameter is actually slightly smaller (but the outer rim is even wider, providing even more cushion.)  I use the RM 16S for lead trumpet work that requires me to play gigs that last for an extra-long time, or that require almost continuous playing, or that involve an unusual amount of extreme upper register lead trumpet playing.  The RM 16S requires me to back off and relax when I play even more so than the JT CS does, because of the way that it blows, which is extremely efficiently.  And that, in addition to the extra-wide extreme cushion rim, makes it feel almost like I don’t even have a mouthpiece touching my lips when I play on it.

The RM 16S also has a bit more edge and brightness to it than the JT CS does.  But on the other hand,  the JT CS is a little fatter-sounding, yet still has plenty of brightness to allow it to cut through a big band also.  Flexibility is also just a little bit easier on the JT CS than on the RM 16S.  But, my choice of which one of these two mouthpieces I use when playing lead depends both on the style of the piece of music that I’m playing, the type of sound that I want for that particular piece, and also sometimes the type of performance that I’m using it in.  (I’ll often switch back and forth between these two lead trumpet mouthpieces during a big band gig.)These three trumpet mouthpieces of mine that are made by Legends Brass (GIT R DUNN, JT CS, and RM 16S) are the only trumpet mouthpieces that I ever use now.  I don’t have any formal relationships with any instrument manufacturers, and I use a variety of great instruments made by various manufacturers.  

Above: Legends Brass Mouthpieces used by Randy Dunn. L-R Git R Dunn, RM 16S, JT CS .600″

2020 so far has been a ‘challenging’ year to say the least? What has this meant so far for your work? How have you been adapting to online work

Well, like everyone else, I’ve had a lot of gigs and performances canceled as a result of the COVID-19 pandemic quarantine.  For many of us living in the United States, the quarantine began in full shortly before Palm Sunday and Easter, so many of us musicians had our Easter gigs canceled.  Several bands that I often perform with usually play a lot of festivals and party gigs beginning about early to mid-spring and going on into the summer, and those gigs will also all be lost this year, as well as the many weddings and wedding reception gigs that we do.  Also, the jazz quintet that I sometimes play with abruptly had all of its restaurant, club, and wine bar gigs canceled after all of those venues were ordered to close down in order to slow down the spread of the COVID-19 virus.

During the quarantine, I have been able to keep my trumpet practicing going strong, in spite of the fact that I have no performances scheduled for the foreseeable future.  I begin my first practice session of each day, as always, early each the morning, shortly after waking up and having some coffee.  It’s been difficult to be as productive as normal for most of us, I think, because most people haven’t been sleeping very well during this quarantine, for various reasons.  That’s one of the main reasons why I make sure to get my trumpet practice out of the way early, while my somewhat sleep-deprived mind is still in its freshest and most productive state.

I originally thought I would be making a number of new trumpet videos to post online while under quarantine, but—so far, at least—I’ve been busy with other things.  In between keeping up with the pandemic news and standing in long lines for groceries and other essentials from time-to-time when I need to get them, I’ve also been hard at work finishing up my income tax returns (which, in the U.S., can be rather complicated and time-consuming, unfortunately.)

Also, during the earliest days of this quarantine, I was bored enough and had enough time and energy on my hands that I started to work on designing some new trumpet mutes that I had been thinking about making for a while.  I spent a lot of time experimenting with various prototypes for these new mutes and, as a result, I came up with a really great set of unique mutes (or, more accurately, a mute system) which is extremely versatile and can be used for several different types of common mute indications found in trumpet sheet music, or for discretionary trumpet solo use, or even as excellent trumpet practice mutes.  

The result of this effort is that I have now created the best trumpet mutes of the following types that I have ever played:  bucket mute, hat mute, “in stand” mute, practice mute, and whisper mute (soft mute.)  I am so thrilled with the results that I am planning on manufacturing these mutes of mine commercially once we all start recovering from the current economic crisis that has resulted from the COVID-19 pandemic shutdown.  I’m hoping to be able to launch these new mute products beginning in early 2021, and I think that I’ll be able to sell them at a very reasonable price so that they are afforable not only for professional trumpet players, but for students as well.  I really believe in these mutes, and I think that they will become revolutionary new accessories that every trumpet player will want to have.

It’s interesting that it took a pandemic and a quarantine for me to be inspired to invent and perfect those new mutes.  I read an article recently that said that, when Sir Isaac Newton was quarantined during another famous pandemic that you might have heard of, known as the Plague, he continued his studies and work at home.  It was during this time of quarantine that Newton did some of his best and most famous work, including inventing calculus, studying optics and light, and studying gravity, which led him to the creation of his famous laws of motion.  https://www.biography.com/news/isaac-newton-quarantine-plague-discoveriesI’m not saying that my newly-invented trumpet mutes are as significant or as important as all of those things that Newton invented, of course.  But, I do think that my new mutes will be significant to trumpet players and that they will also be greatly admired and appreciated by trumpet players and their audiences.  This is just another example of how we can all use this time of quarantine and isolation to accomplish some great things, or at least to continue to get some work done so that we are ready to resume our business as usual once the quarantine is lifted.  Once the quarantine ends and live music performances are finally allowed to resume, those of us who kept our chops in shape by practicing throughout the quarantine period will be ready to work, and we’ll be the ones getting all of the gigs and keeping our performing reputations going.  (And each student who continues to practice hard throughout this quarantine will likely wind up being first chair in their school band when school finally starts back up again.)

What advice do you have for young aspiring trumpet players out there?

I recommend practicing daily in multiple practice sessions, and always practicing with daily goals as well as long-term goals.  (It helps to write everything down.)  Also, you should find the best teachers you can to study with, and don’t be shy about asking questions of pro players who you see perform, or who maybe that you yourself get to perform with.  (You can learn a lot from older players, especially.)

Also, make sure that other people hear you play, and that you are always prepared to sound as good as you possibly can, even if you are just playing in rehearsals or in semi-public practice areas.  (Such as university music school practice rooms.)  A university jazz band director happened to walk by my practice room in the school’s music building once when I was in the middle of playing a Maynard Ferguson solo (from his latest album at that time), and that jazz band director (who hadn’t met me before) introduced himself to me and invited me to audition to play lead trumpet in his jazz band, since his hot-shot lead trumpet player that was in his band had just graduated and left the university.  I wound up winning the audition for that spot in the band, which means that there must have been a bunch of trumpet players with weak upper registers at that school that particular year, because I didn’t even think that my range and upper register were that great at that time!  But that was a really great experience for me, as it was my first opportunity to play lead trumpet in a big band.

I also recommend that you make friends with other fine professional trumpet players and other serious trumpet students, and that you also develop strong friendships with other fine musicians who play other instruments besides the trumpet.  Not only can you learn a lot from these types of connections, but these relationships could also help you to get some future gigs and other jobs of various types (such as music teaching jobs.)

If you ever get bored with your practicing and playing, then do something to shake things up a bit.  Start playing some styles of music that are outside of your typical comfort area.  For example, classical and orchestral specialist trumpet players could start practicing some jazz also.  And, jazz or big band specialist trumpet players could practice and play some classical trumpet music.  Not only will this give you more musical diversity, but it will also make you a better musician, and will present you with the opportunity to learn and develop some new skills.

Listen to a lot of recordings (over and over again) and also listen to live performances of the trumpet players who you want to sound like, and then make an effort to copy their sound and style when you practice.

Thank you, John.  This interview and discussion was a real pleasure.


Frate Precision : HM Cup Review

I speak to trumpet players regularly who are looking for are looking for a slightly shallower than standard cup in their mouthpiece. Perhaps they are playing a variety of different styles and need the extra brightness and flexibility. Some are symphonic players looking for that additional ‘utility’ mouthpiece that they can switch to when required. Others are commercial and jazz players who are looking for great slotting in the higher registers without a big compromise on sound quality. Or maybe they are looking for a mouthpiece that they can play comfortably on E-flat or Piccolo trumpet.

The best solution that I have found that can work for many of these players is the HM cup/rim range from Frate Precision. They are designed and made in Lombardy, Italy by Dario Frate – you may be interested to read this interview with Dario here.

The striking thing about these high cup mouthpieces is that you do not feel a compromise in sound quality and sonority. The ‘H’ refers to the High (or medium shallow) cup, and the M is the code for the rim shape. Combined with the slightly more open 106 backbore, it is easy to get a ‘sizzle’ to the sound while still keeping a lovely rich tonal core. The slotting and flexibility on them is also fantastic.

On piccolo trumpet, they are available with cornet shank. The standard shank/backbore seems to work best for most players on these.

Here is a list of my most popular and recommended models:

3HM, 106 : This has the number 3 rim (16.62mm), medium shallow HM cup, 3.66mm throat and a medium large backbore. Rim and cup combination and very approximately equivalent to a Bach 3D.

5HM, 106 : Similar to the 3HM, 106 but with a slightly narrower (16.35mm) inside rim.

7HM, 106 : As above but with a 16.22mm inner rim, roughly equivalent to Bach 7D.

All of these combinations are also available and in stock with cornet shank – please do send me a message if you are interested in one of these, or would like any advice on finding the right mouthpiece for you.

I have also reviewed a number of different styles of Frate Precision mouthpieces here.


Trumpet Artist Profile: Mario Guarneri

Mario Guarneri will be known to many readers as a performer and educator of the highest calibre.  A former member of the Los Angeles Philharmonic, Mario is also in demand as educator and lecturer on the pedagogical concepts involved with his groundbreaking designs (www.berp.com) and the trumpet in general.  Here he shares with me some thoughts on approaching different stylistic challenges both as a player and a teacher.

Can you please give a little background to your playing styles? 

Interesting question that I don’t ever recall answering before. First of all, I believe from the beginning I was taught to play in the style of the music you were performing.  Using my ears and understanding the context was critical to what sound and style I heard in my head and should be reflected in the music I was playing.  The point of being a professional musician when reproducing music composed by someone else is to first understand the “style” of the written notes (context).  You then create the style in how you take notes on a page and end up making appropriate sounds to come out of the bell.

The style I select is totally dependent on the context of the music when I’m playing something composed.  If I’m recreating someone else’s style by ear then I also need to understand and listen to the context.  In either case the ear connected to your musical brain is your most important teacher. That by the way is also true for basic sound production on a trumpet.

In my opinion I was not paid to place my “style” into orchestral solos required to perform as an orchestral trumpet player. However, I must admit that I tried sometimes to the dismay of the conductor.  The skill of being able to perform in different styles served me well during the 12 years of my life when I was working in the LA studios.  It was not unusual to go from “Looney Toons” in the morning to a John Williams score that afternoon and maybe an LA Chamber Orchestra concert that night.  How fortunate I was to have those opportunities.

When I improvise and/or perform music I have written, then I create my own style which I hope to make interesting, compelling to the listener, lyrical, “musical” and above all honest.

What kind of groups did you play in as a kid? 

I played in the school band starting when I was eight… (yes we had a band in elementary school.)  When I was eleven, I played in what was called a “Dixieland” band with high school kids, and I joined the Berkeley Youth Symphony when I was 14.  I joined the union at 13 and played summer gigs with a dance band of adult professionals.

Who were your biggest trumpeting influences? 

I was listening to Louis Armstrong, Bunny Berigan, Harry James, Rafael Mendez, Muggsy Spaniard, Roy Eldridge, Chet Baker, a recording of the Haydn by Wobisch and my teacher Eddie Smith

What was the focus of your practice time as a young player and student? 

The Arban’s book and Mendez solos, plus transcribing some jazz solos and improvising on basic blues changes. I had a 78 record with blues in Bb on one side and in F on the other side.

We seem to live in an age where people need to be defined by one thing.  Pigeon-holed.  Does this ring true to you?

I have done my best to defy being thought of as being a particular type, (i.e. classical, commercial, jazz, avant-garde, studio.. etc.) of trumpet player.

What is your experience (both positive and negative) of being defined in this way? 

I personally see nothing positive about being defined as one kind of player.  However, there are people that hire musicians who want to make sure they are hiring the right person for the job “style-wise” who want to know “what kind of a player are you”?  I think a better question would be and one that I have asked players when I have contracted orchestras for film dates, “are you comfortable playing…?”  Professionals know what they are capable of doing and rarely put themselves in the wrong musical situation.  If they do it once it probably won’t happen again.

What steps have you taken to overcome any difficulties caused by this? 

One of the best pieces of advice I got on this subject was from Manny Klein, a legendary trumpet player in Los Angeles.

“Kid, it’s not what you play, it’s what you pass”.  It happened more than once that a contractor put me in the wrong seat…faced with a lead trumpet big band part with Chuck Findley in the section I would immediately pass the part along with the extra money I was to receive as the principle player.

What are the biggest technical changes that you make when completely switching styles?

First, I would decide if it will help to make a physical change by playing a different instrument and/or a different mouthpiece.  Those changes will often support the way I hear a different style. Hearing the style in your head is the most important aspect of switching styles in my opinion.  Any technical changes happen “automatically” if I hear the style/sound before I put it into the instrument.  For instance, articulations are very different between the orchestral world and bebop style.  I could break it down to “where the tongue goes and how the air is released” for a student, but eventually you need to get to the point of hearing it and playing what you hear.

Do you need to take a different approach to technical trumpet practice as you prepare for a patch of symphony work compared to say a jazz combo?

Yes, but not entirely.  I believe that the basic function and use of the breath is the same, and that the embouchure set up also stays consistent.  All of the things I do for sound production, strength, flexibility, endurance, range are the same.  Suspending the breath and playing on top of an engaged air capacity works for everything.  Free buzzing, playing on the berp, playing pedals, working the Stamp exercises and working out of the Flexus book with lots of bending is what I do for starters every day.  (See my videos, Berp & Bat Tools Part I and II at www.berp.com). The bigger difference in approach is between written music and improvised in my mind.  

For recreating notes on a page, the skill set is all about accuracy, evenness of sound, intonation and musical style.  That would also be true for playing lead in a big band, principle in an orchestra, brass quintet, etc.  

Improvising requires playing what you hear/compose instantaneously!  At the very least a different skill set which to my mind requires different practice routines.  The first part stays the same.  Working towards the most efficient sound production habits should be the foundation for all styles and musical challenges.  

The essential difference comes down to being able to instantaneously hear and play a sound that is not predetermined. Because you are composing in the moment when improvising your technique has to be such that you can produce whatever interval your creative mind comes up with.  When I played in the orchestra when I knew the schedule for the year, I could prepare to play every note I needed to play for the next year (except for the contemporary pieces we performed or obscure literature which I had not seen before). 

It is easy to get very static in your approach when playing in an orchestra because of the requirements I just mentioned.  The practice routine will also start to become too “routine” and your playing can suffer from staying too inside the box…doing only that which allows you to “do your job”.  Of course that in itself is a big challenge, but I believe the musical benefits of doing more than that are extremely rewarding and worthwhile. 

Your basic set up should allow you to do whatever you hear and your daily routine should include exercises you make up on the spot so that you can test to see that your set-up allows intervals and dynamic shifts that you may never have thought of before!  The critical part of the set-up is fully explained in the previous mentioned Berp and Bat Tools video, but how you set up and suspend your air and “creating a face” with your embouchure are the most important elements.

How do you keep your ears and brain fully prepared for switching and playing in different styles, from a musical perspective?

This may sound obvious, but I believe the most efficient practice tool is to listen very intently and imitate on your instrument and with your voice.  It is also very helpful to record and compare your version with the style you are trying to recreate.  Playbacks can be painful but “the proof is in the pudding”.  Finally, here is an exercise I created to help me with this process.  Take an orchestral excerpt like the opening to “Pictures at an exhibition” and play the pitches out of time and transpose up and down an octave from the original for each note.  Connect the line in an improvisational style.  Does your set up make it easy to do this?  Starting from the other side of the spectrum take a bebop line like “Freedom Jazz Dance” and perform it as though it was the opening to “Pictures….” 

How do you approach all of these practice elements with your current students?  Is there a technical ‘middle ground’ to be found to give students a good overall grounding, or do they need to be prepared to switch? 

If you prepare consistently with each breath engaged and “making your face” at the end of the breath you will have the potential to perform whatever you are hearing in your head. Challenge yourself every day and enjoy the process. Music is such a wonderful gift to share ….do it with gratitude and appreciate the opportunity.


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]