Frate Precision : HM Cup Review

I speak to trumpet players regularly who are looking for are looking for a slightly shallower than standard cup in their mouthpiece. Perhaps they are playing a variety of different styles and need the extra brightness and flexibility. Some are symphonic players looking for that additional ‘utility’ mouthpiece that they can switch to when required. Others are commercial and jazz players who are looking for great slotting in the higher registers without a big compromise on sound quality. Or maybe they are looking for a mouthpiece that they can play comfortably on E-flat or Piccolo trumpet.

The best solution that I have found that can work for many of these players is the HM cup/rim range from Frate Precision. They are designed and made in Lombardy, Italy by Dario Frate – you may be interested to read this interview with Dario here.

The striking thing about these high cup mouthpieces is that you do not feel a compromise in sound quality and sonority. The ‘H’ refers to the High (or medium shallow) cup, and the M is the code for the rim shape. Combined with the slightly more open 106 backbore, it is easy to get a ‘sizzle’ to the sound while still keeping a lovely rich tonal core. The slotting and flexibility on them is also fantastic.

On piccolo trumpet, they are available with cornet shank. The standard shank/backbore seems to work best for most players on these.

Here is a list of my most popular and recommended models:

3HM, 106 : This has the number 3 rim (16.62mm), medium shallow HM cup, 3.66mm throat and a medium large backbore. Rim and cup combination and very approximately equivalent to a Bach 3D.

5HM, 106 : Similar to the 3HM, 106 but with a slightly narrower (16.35mm) inside rim.

7HM, 106 : As above but with a 16.22mm inner rim, roughly equivalent to Bach 7D.

All of these combinations are also available and in stock with cornet shank – please do send me a message if you are interested in one of these, or would like any advice on finding the right mouthpiece for you.

I have also reviewed a number of different styles of Frate Precision mouthpieces here.


Vhizzper : Mute Review

So, here is a really interesting new product that I have been sent through for review… The Vhizzper mute is the brainchild of Christoph Baerwind, trumpeter in ‘German Brass’ and ‘Der Orchester der Hamburgischen Staatsoper’.   The essential concept is a practice mute that can also be used as a mouthpiece mute.   This is not something that I have encountered before so was fascinated to give it a try.

This mute is adjustable so that you can alter the resistance level and volume. It also comes in 3 colours as pictured above! To start with I used it as a traditional mute. I spent a minute or so trying the different resistance/volume settings and found that I was most comfortable playing at the halfway point between closed and open. This seems to give the best balance for me, but even with the adjuster completely open, the volume is still nice and soft.

I have to confess that it took a little while to get to grips with this mute. Notes were not really where I was expecting them, and I did not really feel in control. However, what I found after a short while was that as soon as I backed off a bit and tried to imagine that there was no mute in, it became easy! I had been over-blowing, which I can only assume is the way that I have always subconsciously approached practice mutes in the past.

It is such a breath of fresh air, being able to blow naturally and keep the centre of the notes exactly where I want them. Once I got used to playing with less effort, even my low C was in tune – this has been sharp to varying degrees on every practice mute that I have ever played. Intonation and response across the range is also very even.

Not only is this a good tool for doing that essential practice when noisemaking is not convenient, I can also see it as a great training tool. Sometimes when faced with a student who just needs to get used to blowing more and keeping the throat open, I have prescribed short bursts of playing with a more traditional practice mute such as a Denis Wick, to add resistance to help with that. In contrast, I can see the Vhizzper being a really useful tool for helping students to develop their lower breathing muscles, and keeping really natural airflow and support.

Next I set the adjuster to the closed position which seems to give the best response for me when using just with the mouthpiece (as pictured above). I have always liked to incorporate lots of free and mouthpiece buzzing into my practice and teaching. It can be a great way of really forcing you to concentrate on the absolute basics of breathing, control and blowing, without getting hung up on the sound. I have tried lots of buzzing aids including the Berp and the Buzzard and found them to have a really positive impact. The Vhizzper is another good product to add to this category.

It adds a little more resistance to your natural mouthpiece buzz so that it comes slightly closer to the feeling that you get when playing the trumpet. It also adds a little more resonance, which is surprising seeing as it is also muting the sound! This helped my general range for buzzing (I have always struggled to get a good natural buzz when playing in both extremes of high and low) and also naturally encourages you to support the airflow in the same way that you would want to play the trumpet.

In summary, I am very impressed! The very nature of a practice mute is that there is a large element of compromise. You are going to lose a level of response, intonation and natural vibration in return for a quieter sound. However, the Vhizzper keeps these compromises to a minimum, stacks up well against the alternatives on the market, and also gives you a valuable mouthpiece buzzing tool. It is certainly worthy of place in any trumpeter’s mute armoury!


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]

Frate Precision : Mouthpiece Review

Since 2006 Dario Frate has been designing and making mouthpieces from his base in Lombardy, Italy. The aim across the entire range is to give the player richness of sound, fluidity, and to do it as easily as possible. These are certainly noble ambitions and I was very keen to try some mouthpieces for myself!

I asked Dario to send me a small selection of mouthpieces with the following brief:

  1. An ‘all-rounder’ for a 3C-style player that can accommodate a warm classical sound as well as lighter styles. SELECTED: 3 M,3,106 with a semi-round rim
  2. A possibly shallower version of the above mouthpiece that could help the same player make a brighter sound. SELECTED: 3 HM,106 medium rim shape, medium large backbore
  3. A slightly wider rim mouthpiece aiming at a 1.5C-style player that still gives a degree of versatility. SELECTED: 1 M,3,106 with a semi-round rim
  4. A symphonic style piece allowing a free blow with a rich tonal core. SELECTED: 6+ M,3,106 with a semi-round rim

Below are my thoughts after taking them all through their paces. For general comparison and reference points I have used the Bach sizes to describe them, purely because these are references that most people are accustomed to, and not because they are in any way modelled after the Bach range.

3 M,3,106

First impression on the chops is that this is a very comfortable semi-round rim. The response is quick and the notes slot very easily, far easier than many of the 3C-style mouthpieces that I have played on in the past.

Working through some flexibility exercises (Colin), the word that springs to mind is ‘easy’. There is also a depth to the sound that I often find is missing when playing on a flexible and easy-slotting piece. After playing through some middle register melodies for a few minutes, I am finding that the sound is opening up more as I get used to backing off the air a little bit. This really does tick the boxes that I was looking for with this brief – a solid, warm, centred sound with flexibility and slotting.

3 HM,106

The medium-rounded rim on this has the high point nearer to the centre of the rim rather than the inside. This is really helpful for a little more lip compression without needing to go to a smaller rim size. The cup is also slightly higher without being too shallow. I often find that my fleshy lips bottom out easily on really shallow cups so this seems like a good compromise for me. 

The response is lightning fast with a nice bright yet rounded sound. I am no lead player by any stretch of the imagination but I am able on this mouthpiece to play with good flexibility and control with a centred sound above the stave up to high Fs and Gs – which is the upper limit of my normal controlled, working range. This strikes me as an ideal mouthpiece to look at if you are a legit player looking for a more commercial type piece to switch to when required, and also for more natural commercial players who like a slightly wider rim and a fairly open backbore.

1 M,3,106

This is similar in setup to the first mouthpiece that I played but with a slightly wider inner rim, getting closer to a 1.5C kind of feel. Again, this is really comfortable with a nice balance of cushioning and inner-rim ‘bite’. Flexibility and slotting feel great, and the biggest thing that strikes me is the consistency and depth of sound that I am able to make across the entire range of the trumpet. Playing on these slightly larger rim mouthpieces does not come naturally to me so I have had to spend a good 20 minutes playing through studies and exercises on this one before I can really get the measure of it. And boy was it worth it!!! It has been a long time since I was last able to make a sound this big and broad that still has good control and centre. 

6+ M,3,106

I asked Dario to recommend a setup that could suit a symphonic player who likes the feel of a 1.25C type rim but wants more depth and tonal core. The 6+ that I have been sent has a larger rim diameter than the previous model and slight V-shape to the cup. The sound is huge and still beautifully centred. I have to confess though, that having not played on this style of mouthpiece since college 20 years ago, I am not the best person to really put this through its paces. Some symphonic colleagues of mine here in Manchester kindly agreed to help!

Both of them have generally played on slightly more open feeling mouthpieces to a standard 1.25C, and both agreed that this fits really nicely in that zone. There is a warmth and centre to the broad sound that I am hearing in medium dynamics that holds together really well as they really open up. There are also some really nice increased overtones at the louder dynamics, particularly noticeable on the C trumpet. Feedback from both players is that these feel really comfortable to play too, with the same easy flexibility and slotting that I found on all of the other mouthpieces. You never know, I may have just made a couple of sales here!

In summary, Frate Precision is a really coherent range that sticks to that ethos of richness, fluidity and ease across the entirety. Many mouthpiece manufacturers will make fantastic mouthpieces to suit any player’s requirements and across those ranges will be enormous variation in feel and core sound. This is not a bad thing! We all as players look for THE ONE, so we are so lucky at the moment to have so many dedicated designers and makers who will help us to achieve that goal.

The feature that Dario Frate has brought to his range is that ALL of his mouthpieces should make our jobs as trumpet players, slightly easier, while keeping a rich tonal core in mind. If this is something that you are looking for, you will more than likely find something in this range that suits you.

For further information and expert advice, you can contact Dario Frate directly via his website.

You may also be interested to read these interviews with Frate Precision artists Massimo Longhi and Fabrizio Bosso, as well as this interview with Dario Frate himself.


The Bob Reeves Interview

When you talk about getting your trumpets adjusted so that they respond perfectly to you or matching and adjusting a mouthpiece so that it works perfectly with your horn, you are probably already thinking about Bob Reeves!  

I was able to meet up with Bob at ITG 2018 for a coffee and a chat about his career.  In 2018, Bob was celebrating a staggering 50 years in the industry.  I am sure that he has some pretty special stories to tell, but in this interview, we mainly stuck to the technical stuff and the fascinating challenges that he faces in helping us all to be better players.

One of the topics that readers would like to hear about is matching the right equipment to players.  What can you tell us?!

When I started in Hollywood it was the capital of music.  There was so much recording going on there.  There were great players already in Los Angeles but also lots of touring orchestras from the US and around the world would visit.  I used to work with whatever they brought in for me to look at.  My philosophy is to service.  I am not a salesman; I don’t sell things.  I listened to players to work out what will make their life easier.

Take one great Hollywood trumpet player, Tony Terran. I saw him 3 times a week looking at adjusting mouthpieces.  I had pretty well perfected the process for valve alignment – I call that the foundation.  If that is not right, you can forget the rest of it.  So, one day I took his trumpet, took it in the back, cleaned it and did a valve alignment on it, and brought it back.  He then came back 3 days later with all of his trumpets and his son’s, had them aligned, and never needed to have another mouthpiece adjusted in all his career.

I stayed in touch with his son who now still uses those same trumpets in Las Vegas and says that he doesn’t ever need anything else from a horn.  I like to hear that.  Like I said, I am not a salesman, I don’t care what people come in for.  I hear them play, and that gives me most of the answers to where their problems lie.  If I can fix that by looking at the player and their equipment, that is great.  I don’t have to sell them something.

So, if you are listening to a player, can you confidently diagnose their technical deficiencies just from the sound?

Yes.  I won’t mention any names, but there is a particular trumpet soloist who makes me crazy.  I can hear on recordings that they are a very fine musician, but there are some technical problems that I would be able to fix given a chance.  I can hear that the instrument is very badly out of alignment, so every note sounds different.  And you can see looking at their face while playing that it is a battle and is having to overcompensate.  Maybe one day I will reach out to them!

I built trumpets at Benge back in the 60s.  I was the worst guy in the place because I always wanted to try to improve things.  After 3 years, I didn’t have a friend in the place!  I am not sorry about that at all.  It started me on the process of making trumpets to be as good as they can be.  And I still keep working on it today.

Trumpets built today by a number of manufacturers are very poorly made and adjustment is essential.  Many instruments are designed alongside great players, but the problem is that at the mouthpiece end of the instrument, you can’t really hear yourself clearly while playing.  I will always listen to the sound coming from the bell.  That is what matters.  You have to be able to tell where the note actually starts.  I can tell you whether the note is starting inside the bell, at the edge or even outside of the bell.  You cannot tell this when you are playing.

All the time that I am working with a player, I am listening carefully to their sound and how they describe what they are not satisfied with, but I am also slowly teaching them to listen too, as they have often never thought about it before.  You are busy in your head when you are playing so you tend to ignore things.  Maybe you are just glad to get the note!

So, doing the valve alignment is the foundation to figuring out any other problems.  Higher register is where I see the biggest problems occurring, often with very fine and strong players.  People reach a point where they change from what they can do instinctively with their good technique and change to try to ’muscle’ the next note out.  This is an area that I often work on both in trumpet and mouthpiece adjustment but also in that player’s own technique.

I have a good friend and talented trumpet player.  He could play solos with double C and triple C, just like songs.  He had that upper register so figured out that he could just ‘play’ the thing without thought.  He never looked like he was working hard.  And he did that on a standard mouthpiece.  There are very few people who have figured that out!

So how do you approach it with a customer when you know that there are things as much about their own trumpet technique that need to be fixed, as well as the trumpet and mouthpiece?  That must be tricky!

Everybody who comes in has their own opinion.  If it is correct, I say nothing.  For most players, it takes more time to adjust their thinking than it does to adjust the horn.  The mouthpiece is David and their own mind is Goliath!  Through our conversation I need to slowly get them to give up a little – as my suggestions gradually become more successful, they become easier and easier to work with.  The next time they come back it is much easier.

What are the most common adjustments to mouthpieces that you make?

The rim is the most important to most players.  Most people come in with a rim that they like, so I just cut the rim off and work with that if it is already comfortable for the player.  Then we work on finding something that matches the sound that he wants and also with the kind of resistance that he wants to match that horn.  I don’t tell anybody what to do, I don’t make choices for people.  I advise, but you’ve got to make the choice that is right for you.  You’ve got to be happy.  That’s the only way that I am going to be happy.

Is there ever a battle where perhaps people don’t like to hear what you have to say?

Absolutely.  A few people have packed up their stuff on me.  You know what, sometimes they don’t come back for years.  And then all of a sudden, they come back because someone else has eventually convinced them.

Which of your customers over the years have given you the most pride in the changes that you have been able to help with?

There are so many and don’t want to leave anyone out!  One example would be the 8 hours that I spent with Hakan Hardenberger and changed everything that he came in with!  He did a concert the next night and sounded great.  Doc Severinsen has been a great guy to work with.  Sometimes it is difficult as he always has his own opinions and you have to work with that.  He is a great trumpet player and a terrific person.  There really are too many great players that it has been a pleasure to work with!

Are there common preconceptions that players come to you with?

We talk about the gap between the end of the mouthpiece and start of the leadpipe.  People have opinions about that, professors have opinions about that.  The player tells you that they must have a gap of precisely X.  Nobody can tell you that, it is very personal.  For you, that gap might be 2 hairs’ width too big or small, but some people will remain adamant until you have proved it to them.  6 thousands of an inch gap completely changes the way that the horn feels and sounds.  Getting the gap right is matching the mouthpiece to the trumpet.  That gap cannot be taken to the next trumpet.  You have to discover it all over again.  That is what got me started thinking about building sleeves, because the player wants to have one mouthpiece in a number of different horns. I think of mouthpieces as tools – I probably have 25,000 different ‘tools’ in my shop, all with different purposes.

If you are playing the horn in a small room, you may want a different gap than you may want in a larger room.  The reflected sound coming off a wall in a smaller room is going to be very different to what a listener will hear when you are playing in a concert hall.  This is one important thing that I have to teach players when they come in.  If I convert a player’s mouthpiece to the sleeves system, I suggest 3 sleeves.  At first, the player wants the one that works there and then. It may not be perfect in the next venue.  So, small variations may sit easier for different performance settings.

The important thing for me is not to have a plan for a particular player until I have heard them properly.  Then, I will have a number of options in mind for us to experiment with.  I have been doing this a lot of years now, but I will never presume to know exactly what will be perfect for each player that I hear.  It is really important to try the things that your instincts tell you may not be right too!

‘Service’ always needs to come first, certainly before ‘sales’.  I hope that this is something that continues in our industry, but it is hard to predict what is to come for different companies in the future.  The thing that I think about at the end of each day is the person that I have helped and whether or not their life is a little easier.  Not, whether I have made money or not.

Are there any new developments or tools that you are looking at for the future?

We are always looking to see what we can improve both in the products and services we offer, and in our manufacturing processes.  For trumpet, our latest thing is a project of mine that I had wanted to do for several years.  I took good examples of popular rims and cups — 3C, 1-1/2C, and some others – and designed a backbore to go with them that keeps their classical sound but improves their intonation and efficiency. 

Our biggest developments have been for trombone.  I’ve done custom work for trombone players since the beginning, but for the first time we released a line of stock mouthpieces in collaboration with Noah Gladstone of the Brass Ark.  We have models for small and large bore tenor and bass trombone. It’s been great to see players like Jay Friedman and Charlie Vernon of the Chicago Symphony and David Rejano Cantero of the L.A. Philharmonic using our pieces.  Besides the stock and custom mouthpieces we make, we now also offer our Reeves Sleeve system for large bore tenor and bass trombone.

I have a hard time sleeping at night because I’m always thinking of new things.  The next project will likely be a new trumpet backbore I’ve been working on.  We’ll see!

Do you still have any ambitions to fulfil or are you there yet?!

One thing I would love to do is to spend more time travelling to different countries, listening to and working with lots more players. Although the fundamentals are the same for great trumpet players around the world, there are so many subtleties and small differences of tone and style that I want to explore more.

To find out more about Bob Reeves Brass, please visit their website: bobreeves.com


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]

Van Laar Trumpets : Interview and Instrument Overview

Interview with Hub Van Laar (June 2018 @ ITG Conference, San Antonio)

What made you want to play brass in the first place?

As a child you had 2 options in my village. I began by playing football, and in my first game I scored 3 goals… in the wrong direction! It was then decided that I should go to the ‘Fanfare’ and play an instrument! I mainly played trombone and got to a very high level. I stopped playing however because of stage-fright. The nerves affected me so badly, and after trying hard to overcome this, I pursued the repairing.

Hub Van Laar

What made you want to get started with designing instruments?

It was funny – when I was 8, I said I wanted to be a trumpet-maker. I always had that goal. I don’t know why! I wanted to be a trumpet-maker and a farmer. I played in the local brass band, and I was thinking, “Somebody has to make these instruments”. The military band were looking for someone to repair. After that I went to work for a large Dutch manufacturer, and then had the opportunity to work for a small manufacturer in Stuttgart as part of a team of just 4 people. There you had to do everything, it was a great experience.

I have always loved my work and have never been a person that likes to have a day off. I am always happiest when I am busy. The workshop is just 46 seconds from my house!

What were the first models that you designed and built from scratch?

You start working out of necessity and repairing to earn money. I then started to adjust and adapt instruments and would get lots of players to play them to hear what they thought. I started with the flugelhorn because in Holland and Belgium we have ‘Fanfare’ groups with 10 or 15 flugelhorns. This was my market! The trumpets came after that, then the cornet, and now this year the piccolo trumpet is ready.

You have to be very careful bringing a new model onto the market, as if it is not quite ready, before you know it you have a bad reputation. I have to be 100% sure that it is perfect.

You have a number of very well-established models in your range now. Where they all designed with a particular sound or style in mind, or developed more for particular players?

In the beginning I worked with a number of players. The difficulty is that everybody tells you something different! The one unstable factor in an instrument setup is the player him or herself. With lots of players around me, I found that the quality got worse because you are constantly having to change things.

I now do most of the testing myself, and then take it to various players once I am completely happy with the design and setup. Listening to the customers is really important. I start a design by listening to what players need, I then go away and work on the technical stuff to create it. You learn this by doing it, it is not a case of reading a book and then knowing what to do. I believe this is a great strength.

Would you say that all of your trumpets across your entire range have particular characteristics that set them apart from many other makers?

They play in tune! It is also important to me that they look good. People’s first contact with my instruments is with their eyes so I need this to be good. The second thing people are interested in is the valves – if they are not perfectly smooth and responsive, they will put the instrument back down again. The third thing is when they start playing!

So, what’s next?!

Life is like sitting on the bullet train in Japan. Everything goes by so quick! At 40, I never worried about that, but after I hit 50, I think about that a lot. I intend to enjoy life more and work slightly less. I have a plan in place for 10 years’ time, for the company to go to a trusted friend who works with me, so that the good work can continue, and the name does not get lost!

Are there any new models that you are keen to explore?

The most important thing for me is that every new model and design is better than the last one. I am not able to spend a lot of money on marketing, so I have to make sure that the quality of my instruments speaks for itself. We just concentrate on one model at a time to ensure that everything is as good as it can be.

We have been working hard on the piccolo, and we have another C trumpet model, that I worked on with a player at the Concertgebouw. Our next investment is going to be in a CNC machine which will help a lot with our design processes. The most important thing for the future is maintaining the high quality that we have now.

Is there anything else that you would like to add?

It is not possible to make these instruments alone. Without Heidrun who deals with the business side, none of this would be possible. I cannot deal with that side of things, I just want to make great instruments.

Instrument Overview with Jesse McBee of Thompson Music:

“At Thompson Music, we are proud to be a dealer for Van Laar trumpets. Particularly, we’ve been impressed by the versatility of their product line, as well as the Van Laar team’s attention to detail, quality, and customer service. From their line of Bb trumpets, the most popular horns we sell and usually stock are the B1, B2, B4, B5 and B7, as well as the Oiram II and Oiram III.  From the flugelhorn line, we see much interest in the B2, B3, and Oiram Fresu.

As aforementioned, the Van Laar line is diverse enough to have an offering for every player’s performance demands. From lead trumpet, to chamber music, to solo playing, to small group jazz, there is a horn to fit that player’s needs. Additionally, several models serve as great all-around instruments should the player need an instrument for various playing demands. Van Laar’s attention to detail is impeccable, combining the benefits of a handmade product with modern quality control tolerances.  Our customers are consistently impressed with the quality and presentation of the product, as we have been when our orders arrive in the store.”

Visit Van Laar Trumpets & Flugelhorns


Buying Guide : Practice Mutes

Practice Mutes have become accepted as a necessary evil for brass players.  They are not an ideal way of preparing yourself, however there are times where we all accept that you just need to practice or warm-up quietly.  Listed below are a number of mutes currently available that will all do the job.  They will all have different strengths though, so I have tried to demystify them somewhat with this ‘Buying Guide’.

NB. The prices listed here are meant as a guide and are subject to change.

Vhizzper Practice Mute and Buzzing Aid

I have put this at the top because it is by far the best practice aid that I have come across. A great mute that does not allow you to overflow while practising, and also has a built-in mouthpiece buzzing aid. Around $80, worth every penny!

Sshhmute Practice Mute for Trumpet

A really great lightweight and responsive mute.  The intonation is pretty good across the range. Low C and below tends to be slightly sharp as with pretty much all practice mutes, however this is better than most.  Priced at just $50, this is a really good all-rounder.

sshhmute

Sshhmute Practice Mute for Piccolo Trumpet

Lightweight, robust and actually surprisingly free-blowing for a piccolo practice mute.  A good buy at $50.

sshhmutepiccolo

Sshhmute Whisper Mute for Trumpet

As with the other Sshhmutes, this has very low resistance and a nice quick response.  The Whisper Mute has a lovely soft tone that can also be used in a section where a real muted pianissimo is required.  Again, a good buy at $50.

sshhmutewhisper

Trumcor Trumpet Lyric Stealth Mute

This is not the quietest practice mute on the market, however it is one of the most even and allows you to blow pretty honestly.  This is a great hotel room tool!  $60 for this one.

trumcor-lyric-stealth

Brass Spa Trumpet Practice Mute

This is extremely decent especially considering its modest price tag of $35.  Back pressure is pretty low, cutting down on over-blowing, and intonation as also surprisingly good for the price point.

brassspatrumpetpracticemute-a

Best Brass Trumpet Practice Mute

This is an excellent compact mute that only just protrudes from the bell.  You do not get a feeling of ‘battling’ this mute as it feels really natural.  It is quieter than most and also has decent intonation. $94.99

bestbrasstrumpetwarmupmutethumb

Best Brass Jr. Trumpet Practice Mute Ebrass

This is a plastic (and therefore lighter) version of Best Brass’ practice mutes.  There are some small compromises in resistance and tuning compared to its big brother, however this is reflected in the lower price of $54.99, and it is still a darn good mute!

bestbrassjrsmall

Trumcor Trumpet Super Stealth Mute

Like the Lyric Stealth, this has a nice even response across all registers and dynamics.  It is softer however, so inevitably has slightly more resistance. $45

trumcor-super-stealth

Softone Mute for Brass – Trumpet

This lightweight neoprene will fit easily in any case and is great for travelling.  There are a number of sponge ring inserts so that you can adjust the volume and resistance levels.  It also doubles up as a very compact bucket mute by hanging it over the bell of your horn.  Even if you already have a preferred general practice or warm-up mute, this is something a little different that will always have a use. $39.99

Softone Mute

Trumcor Piccolo Trumpet Stealth Mute

This is very quiet and perfect for that ‘back of the church’ warm-up.  $40

trumcor-piccolo-stealth

Denis Wick Trumpet Practice Mute

Let’s face it, all of us have probably had one of these classics at some point!  A good solid all-rounder that allows for a quiet warm-up. The intonation is perhaps not quite as good as some of the newer designs on the market, however still a good mute for the price. $42.95

Wick Practice Mute

Jo-ral Trumpet Practice Mute

This is not the quietest mute on the market, however the intonation across the range is very good. $46.99

joral-trumpet-practice-mute-tpt1p-1

Yamaha SB7XC Silent Brass System for Trumpet

The Silent Brass system has been around for a while now, and the latest pickup mute is very good indeed.  Now fitting completely into the bell for storage, the intonation, response and quiet volume are all very good.  Even at the price of $189.99, the sharpness in the lower register has not been completely eliminated, however the digital technology that comes packed inside the Personal Studio, and the acoustic environment that it creates are exceptional.

yamahasilentbrass-1

 


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]

Trumpet Artist Profile: Massimo Longhi

After visiting the Arena in the beautiful city of Verona some 20 years ago, I have been fascinated by not only its history but its use today as one of the most spectacular opera venues that you will ever visit.  Built nearly 2,000 years ago, this outdoor amphitheatre could accommodate over 30,000 spectators, attracting audiences from across the Roman Empire.

What would it be like to work here as Principal Trumpet with its resident orchestra?  Well Massimo Longhi knows!  He has held this position for 25 years now and has kindly shared his thoughts with us.

What got you started on trumpet?

The trumpet came into my life at 10, my grandfather and my uncle played in my family in the village band.

Who and what were your biggest early musical influences?

Certainly, Maurice Andre was decisive, and then the opera, which still fascinates me and stimulates me, and has opened me up to an incredible world and has influenced my way of playing.

Which trumpeters today do you enjoy listening to?

The one and only… Wynton Marsalis

How did joining the ‘Arena di Verona Orchestra’ come about?

The Verona Arena Orchestra is a full-time orchestra that carries out the summer festival in the Arena from May to September and the rest of the year is produced in the beautiful Teatro Filarmonico of the city (18th century theatre) with operas, concerts and ballets.

In 1993 I won the competition for the position of the first trumpet, and have been there ever since.

The Arena in Verona is one of my favourite places to visit! Was it difficult to adjust to playing outdoors instead of a traditional concert hall environment?  Are there any things that you do different technically on the trumpet when playing outdoors?

Every year when we start work in the Arena we need a little bit of acoustic adjustment, the ear has to get used to it. Technically we think we are playing better, rather than stronger, the best thing is to imitate the voice of the singers and to think of projecting the sound.  The less force use, the more the sound projects and sings.  I do not need use any different equipment for playing in this environment.

Are there any favourite memories or highlights from your time so far in the orchestra, that you would like to share?

Today, just as 24 years ago, when I started working in the Arena, the most incredible thing is the moment of silence that precedes the director’s gesture that starts the show and I can assure you that the silence of 15,000 people is magical!

What projects have you got going on at the moment?

In addition to the orchestra, I have been a conductor for some time.  Here is an association that organises my master class concerts and competitions – www.associazionemusicalepozzoli.com

What are the most important things for young aspiring trumpet players to remember?

That the study and the continuous work on the instrument will give the best results, playing an instrument on a professional level means dedicating oneself to it every day.  It’s a bit like trying to fill a bucket with a hole in it!

What gear are you playing on?

I am a Yamaha artist and I use their trumpets but the mouthpiece for the trumpet player is incredibly important!  I play Frate Precision mouthpieces.

What are the benefits that you have found after changing to your Frate Precision mouthpieces?

The first time I tried them I was struck by how they responded to my ideal sound.  It may seem strange but since I use it I have not had any problems with my lips.  I also liked having the opportunity to develop some ideas with Dario and I must say that today I am extremely pleased!

Can you tell us a little about the process involved with selecting your mouthpiece?

Choosing a mouthpiece is not simple but if we base the choice mainly on the sound we want, it is easier to achieve.  Personally, I have to be satisfied with the sound first, and then later I looked for variations on the edge of the rim and the throat that help me to smooth out any imperfections.

Massimo plays on the following model of mouthpiece: Classic Model 2-M-3-106.

For sales enquires and for advice on which mouthpiece to select, please visit our Online Store.

You can find out more about Dario Frate in this interview.

You can read about fellow Frate Precision artist, Fabrizio Bosso in this interview.


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]

Marc Geujon and the New Schilke ‘Soloiste’

Marc Geujon is Principal Trumpet of the Orchestre de l’Opéra National de Paris.  As well being a Professor at the Conservatoire de Saint Maur des Fossés, he is growing in reputation as a soloist and educator.  September 2018 will also see Marc take up a teaching position at the Conservatoire National Supérieur de Musique de Paris. I was delighted to be able to catch up with him and also to find out about his latest collaboration with Schilke.

 What drew you to the trumpet as a child?

When I was 11, I asked my parents if I could learn music.  After one year of learning theory and reading notes, I asked the music school if I could try trombone.  The music school director answered, “There are no more trombones available, you will learn the trumpet…!”.  I began with a non-professional teacher in my village.  One year later, I passed an audition to enter the regional conservatory.  The trumpet teacher didn’t want to take me in his class, because my sound and level were so terrible, and he told me to learn the tuba.  I refused…  He said, “Ok… stop playing during the summer and we will start at the beginning in September.  Four years later, I graduated from the conservatory and joined Eric Aubier’s class for 1 and a half years.  After, I entered the Paris Conservatoire.

Were there any particular early musical influences, or any musicians now that you particularly admire?

As with a lot of players, my first recordings were of Maurice André.  And the CD which persuaded me to become a trumpeter was “Great French Trumpet Concertos” from Eric Aubier.

It was the reason why I asked to study with Aubier.  He taught me a lot, especially on stage.  When I was around 20, he asked me many times to play some baroque pieces for 2 trumpets or more with him (Vivaldi, Molter…) and also played the second part in Bach Masterpieces with him.  It was an incredible experience for me.

Now, I’m a big fan of Reinhold Friedrich, Matthias Höfs, Pacho Flores… As orchestral players, I love Gábor Tarkövi, Peter Masseurs, Frits Damrow, David Bilger, Michael Sachs…

https://youtu.be/Tvua70Ctjfc

Do you have a set practise routine that works for everything, or do you have to change it drastically depending on what gigs you have in your diary?  Does your practice change drastically from doing an operatic run, or a recital tour for example?

I have a practice routine that works for most of my days.  Basics from Michael Sachs Daily Routine, Plog Program, Stamp, Arban, Clarke…  It depends on the time I have to practice.  I try to think the trumpet to be as natural and easy as possible…  I work every day in that way.  The only thing very important is that I need to practice in the morning, every day.  I drive my kids to school every morning and begin my warm-up at 8:30am.

How does this change when you are travelling?

The problem is to play in the hotel room, with a practice mute.  And also the jet lag… but I try to keep my routine and to do my best despite the hours, places and climate.

When you are teaching, have you found that your emphasis has changed over the years as your own experiences and playing develops and changes?  Are there particular ‘schools of thought’ or strict ‘methods’ that you like to use with your students?

Yes, I have evolved a lot in my playing and teaching year after year.  I try to be a student in my mind every day.  I listen to a lot of music, I practice a lot of new things, I buy a lot of new books… so I try to share all my experiences with my students.

The most important thing I try to teach is “Trumpet playing must be easy”.  I have the chance to see most of world’s best singers on stage every evening.  The better they are, the easier they sing!  It takes a lot of time and practice to play with easiness, but it’s so important and useful…

Marc Geujon

What are the key things that young aspiring players should concentrate on?

Sound, rhythm, music…and practice!

What has the process been like working on new Trumpets and Mouthpieces with Schilke? Can you tell us a little about how that relationship came about and what the design process was like?

Around 12 years ago, I was in a music shop in Paris to try a Schilke P5-4 piccolo for a colleague.  Andrew Naumann, Schilke owner and president, and Phil Baughman, sales manager, were in the upper floors of the shop.  They heard me playing the piccolo and offered me a Bb trumpet t try, a B1 anniversary model. I wasn’t a fan of that model, but I tested also a C trumpet (a C3) and it was so much easier to play compare to my Bach C.  I bought it, and an X3 Bb one month later.

I met Andrew Naumann and his wife Julie several times after that, and I’m lucky to say that we are good friends now.  I have played Schilke for 12 years now (C3, X3, E3L, G1L, P7-4, C5-4, XA-1…).  When Schilke created their HD models, Andrew asked me to test them.  They were good horns, but too stiff for me.  We developed the C3HD, which was a little bit more flexible and brighter.  It was better, but I was not completely satisfied for my playing style.  Andrew and I discussed a completely new project.  A new line which keep the standard qualities of the Schilke trumpets, but with a more orchestral instrument, with a beautiful rich sound, a lot of core, brilliance, and extremely flexible.

After 18 months of design and research, the Soloiste series was born. A new C and a new Bb trumpet, completely new…  Not an assembly of existing parts, or small modifications on existing horns…  And I can say that these trumpets are the best trumpets I have ever played.

In February, I was at the Schilke factory to finalize the Bb Soloiste with Andrew, and I asked Chris Jones, the Schilke mouthpiece production manager for a mouthpiece which fits perfectly with my Soloiste new trumpets. He made an incredible mouthpiece for me, and the Schilke Soloiste MG mouthpiece was born…

Most enjoyable project or gig?

I can say that it’s Christmas every day for me.  I’m a lucky guy! I play in a wonderful orchestra, the Opera National de Paris orchestra, with a very nice and talented brass section.  I play chamber music with the Opera brass quintet.  I play regularly with piano or organ for recitals, and more and more with orchestra for solo concerts.

Every time I play, it is a good moment for me.  And I love to meet other musicians from all over the world to play, discuss and share…

Proudest professional moment?

Perhaps ‘Pictures at an Exhibition’ in Vienna Musikverein with the Paris opera orchestra… a wonderful moment with my colleagues.  It was a change from our usual work in the pit.

https://youtu.be/W0-lJVmsDXg

What have you got coming up that you are most looking forward to?

I would love to record CDs now.  It would be a good time in my life to do that… and I would love to travel more to play and teach French trumpet repertoire.

Thanks for your time Marc, is there anything else that you would like to add?

I would just like to thank very much my family for all the love they give me, Andrew and Julie Naumann with all the Schilke team for all their support and kindness, all the musicians I have met who have taught me something extra, and also, thank you, John for asking me these questions! 😉

Please visit Thompson Music to find out more about the new Schilke Soloiste Trumpets on the links below:

Schilke Soloiste Bb Trumpet

Schilke Soloiste C Trumpet

To find out more about Marc Geujon, please visit his website


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]

Trumpet Artist Profile: Vince DiMartino

Vince DiMartino is sought after as both a trumpet performer and educator. His vast wealth of performance experience includes lead and solo work with the Lionel Hampton Band, Chuck Mangione Band and Clark Terry Band. Vince has appeared as soloist with top orchestras and bands throughout the USA and also has numerous solo recording projects. He has played an important part for the International Trumpet Guild over the years, and is a regular teacher, clinician and artist at specialist seminars and courses around the world.

Pickett Brass

Through Vince’s relationship with Pickett Brass, I was delighted to be able to put a few questions to him:

What drew you to the trumpet as a child?

I really was interested in drums but they said they had enough so I tried trumpet! I liked it and stuck with it.

Did you have any particular early musical influences or heroes?

Yes! I met Louis Armstrong in my first year of playing. He talked to me and was so nice to me. I also met Maynard Ferguson the same night!  My neighbor was a bass player and told me to get a few records-Miles Davis, Maynard, Rafael Mendez and Billy Butterfield. Lucky me!

Career highlights to date?

So many…but I try to love every day, concert, rehearsal or practicing. I must say there is nothing like playing with my son Gabriel. I love Greece and my friends, Australia and my friends there, Asia….etc. Every place in the world especially home is great!

As a leading educator and clinician, have you found that your approach to playing and teaching the trumpet has changed over the years? How and why?!

Of course! My attention to the basics of producing a consistent sound are always in my mind. My teaching has become more simple. Every school of trumpet thought eventually reaches that same conclusion.

2015 Cancer Blows

As a top performer, are there any particular routines that you follow to keep yourself in good shape for performance?

I try to keep my fundamentals higher than what is required to play most works.

How do keep on top of your trumpet playing while you are travelling?

Keep doing what you do every day the same as best you can. Try to play three times a day. I usually do that at home too.

Can you tell us a little about the current relationships that you have with manufacturers? What was the process like, working with Pickett Brass on new mouthpieces?

We are lucky to have so many wonderful industry people! I know most of them by name, product and reputation. I have been fortunate to have worked pretty closely with many of them.

As far as working with Peter Pickett and Eric Murine, it is wonderful! They have helped me develop a set of mouthpieces for all my trumpets, cornets and flugelhorn. I am lucky to live close to Lexington and can visit frequently. Peter is always willing to listen to me about my “ideas”. He lets me try some things and then we go on, working together hand in hand. I always feel like I am part of the process. As a result, I have felt that many of the things we have to do with a trumpet are more confident and feel good. Eric is a fine player too and usually comes very close to picking what I need to start with. Great team work from all sides.

Pickett Brass Banner

Pickett Brass offer a huge range of trumpet mouthpieces – their experience in trumpet playing and manufacturing gives a broad range that is immaculately designed and produced. As well as Vince, they have an incredible roster of artists including Allen Vizzutti, Rex Richardson, Doc Severinsen and Jens Lindemann. Visit their website to find out more.

Thompson Music stock a great range of Pickett Brass mouthpieces – you can click here to view the full range.

The Vince DiMartino Signature mouthpieces are all available here

Vince is also a Shires Performing Artist: You can view these trumpets here


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]

Freddie Gavita: Interview & Instrument Review

Freddie Gavita is a young trumpet player at the top of his game. The trumpet category winner at the 2017 British Jazz Awards is receiving critical acclaim for his debut album ‘Transient’ as well universal admiration for his stunning playing with the Ronnie Scott’s Club Quintet alongside many other projects.

I have caught up with him here to find out a little more about him, and also his new role as an Adams Performing Artist and his work with Adams and Fultone Brass to settle on a new Adams A4 Bb Trumpet. I have also had the opportunity to get hold of a couple of different A4 models from Fultone Brass to include a review of this trumpet range below.

Fultone Brass

Freddie, can you tell me a little about your musical background and what led you to play the trumpet? Any particular influences?

So I was brought up in Norwich, and started learning the trumpet in primary school aged 7. Back then you got free lessons and a free instrument, and I was lucky to have a teacher in David Amis who had a great knowledge of the physical side of brass playing, a deep love of all styles of jazz (even free!) and was an excellent communicator. I would put a large part of my career down to him, he was my only teacher from 7 – 18 years old. My mum was quite proactive as well, so she bought me a Louis Armstrong cassette which I really took to, and still love his music. My dad was the one that encouraged me to practice until I actually started enjoying practicing!

What trumpet and mouthpieces do you use?

I play a Monette B6 mouthpiece that I bought from eBay when I was 17, and an Adams A4 Custom Series ML with Gold Brass bell.

How did you find the process selecting your new horn? Can you describe the process?

So I was lucky enough to go on the Blue Note Cruise from Miami with the Ronnie Scott’s Quintet and Natalie Williams, and there were about 40 of the greatest jazz musicians on the planet on this boat! I met a great trumpeter called Keyon Harrold who works with Gregory Porter and has just released a brilliant new album of his own, he was playing an A4. As soon as I tried one I knew I wanted to delve deeper as I’d been looking for something like this for years. For me it’s about excitement, which might be dangerous, but I want to feel inspired when I pick up a trumpet and the Adams does this for me! I tried a few other models (A4 LT, A8 etc) with Neil Fulton at Fultone Brass, play testing the horns in the BBC Maida Vale studios! He had a good listen up close and far off, we recorded a few bits so I could hear what it’s like from the other side and then took it away to try it on some gigs, which is the main test any horn has to pass!

I have obviously played a lot of other people’s instruments on gigs, but this had the characteristics I’d always wanted. I can play acoustic gigs with a rhythm section and still not feel like I’m having to over blow to be heard, the slots are wide so you can bend notes and get sounds and tones from the trumpet that you never knew existed. It plays beautifully at a whisper and you can get a big, thick sound from it when you open it up. The valves are amazing as well!

IMG_4403

Your album ‘Transient’ has had a great reception from critics and musicians alike. Was it a difficult process getting this album together?

Thanks! It was difficult in one sense, that I’ve not done it all myself before. It does mean you have more control over what happens, who you use and where you record etc, the music was the least of my worries in a way! I also crowdfunded the album, which was very encouraging; not having to worry too much about the financial side of it does help you relax a little and think about the playing side of things more. We recorded 13 tracks in one day (10 made it onto the record) which for a trumpeter is probably a little silly, I’m happy with the results but I’d definitely do two days next time.

How do you find striking that balance between working on and progressing your own projects, and working with other bands and artists?

I think you have to be strong in your practice more than anything. Fortunately, I’m not much of a lead player, so I can focus on more jazz orientated practice which keeps me in good enough shape to play most of the gigs I do without being too knackered! I should probably do more reading practice as that’s one thing that I feel I’ve neglected a little over the last few years, but I’m ok! Having your own band and project gives you a stronger sense of the way you want to play and sound, so I guess when I have to sound like other trumpet players for different situations I’m trying to access a place where it’s still me, but bringing out their influence in my playing. I’d love to do more with my band, as its where I feel happiest and most at home, but it’s hard getting promoters to take you on playing original music sometimes.

Any top tips or preferred materials for technique preservation etc.?

I try to take at least one day off a week! I’ve fallen in love with the Cichowicz flow studies again recently and I regularly use material from Flexus (Laurie Frink) and Gerard Presencer’s book. I try to practise in my head as much as possible (often singing in my head and moving my fingers), so my mind is ready for the trumpet when I play. Especially when improvising, it really helps to have a clarity of idea in your head before you try to play it on the horn! I always feel the benefit when I get the chance to warm down as well, even if it’s just a few pedal notes. I love the Vizzutti Response and Rejuvenation exercise from New Concepts for this.

Do you have any advice for young aspiring players?

I would encourage any young trumpeters or musicians in general to go out and see as much live music as they can! Whatever style, hearing the best people play gives you such inspiration and a better idea of what you might want to sound like. I fully believe that you make the sound on the instrument that you hear in our mind, and the better the sounds you’ve listened to closely, the better the sound you’ll make!

Mouthpiece Online review of the Adams A4 Trumpet range:

The A4 is one of the most popular in the Adams range. Developed in conjunction with Amik Guerra, it is one of their heavier models with a heavy bronze and nickel silver valve block and a heavy 140mm bell. I had two popular options to try – The first, Adams’ Selected Series with the most popular option of a large bore (12mm) valve section and a 0.45 gauge gold brass bell. The second model is a custom instrument, similar to the standard Selected Series, but with a lighter 0.40 gauge yellow brass bell.

A4_Selected2

My first impression is that these are fabulously designed and constructed instruments. Nothing has been left to chance, and every curve and nuance in the design is there for a technical purpose… and it looks pretty smart too!

I started by blowing the Selected Series gold brass bell model, which I would describe as a real nice combination of silky and solid. The large bore valve section gives you a lovely open feel through the middle of the horn, which is balanced out well with the responsive leadpipe and the larger bell. The harmonics still slot really naturally, yet you are not held back from creating the richness of sound that players want from this style of heavyweight trumpet.

Fultone Brass

The custom model with the yellow brass bell gave me a similar feel. You can continue to make that rich, dark sound at softer dynamics, yet you get a little more sizzle to the sound when you open in the higher registers particularly.

Customisable options on this model include ML (11.7mm) or L bore (12mm), 4 different gauges of bell and 4 different bell materials. It is easy to see why this model has become such a popular one in the Adams range as it offers the remarkable feature of versatility alongside the tonal characteristics that one would expect from a heavier instrument.

To find out more about Freddie Gavita, please visit www.freddiegavita.com

To find out more about Adams Trumpets, please visit www.fultonebrass.co.uk

US readers, please visit Thompson Music for further information on Adams.

 


Sign up here for new blog articles emailed direct to your inbox:

[jetpack_subscription_form show_subscribers_total=”false” button_on_newline=”false” submit_button_text=”Sign up” custom_font_size=”16″ custom_border_radius=”0″ custom_border_weight=”1″ custom_padding=”15″ custom_spacing=”10″ submit_button_classes=”” email_field_classes=”” show_only_email_and_button=”true”]